U DRIP TRAC for Foam Systems
Plastic Components' U-Drip Trac™ is designed for Exterior Insulated Finish Systems (EIFS) and other foam systems requiring moisture management.
The product has 3 mm (1/8 in.) diameter weep holes with 7.9 mm (5/16 in.) diameter holes on the 12.7 mm (1/2 in.) wide ‘shelf’ – making it ideal for moving moisture away from the foam system.
Some of its features are:
• 89 mm (3-1/2 in.) unpunched back flange with 6.35 mm (1/4 in.) diameter attachment holes spaced 152 mm (6 in.) on-center;
• supports 25 mm (1 in.) or greater foam board;
• extra wide ‘shelf’ for better keying; and
• easy to handle as well as ultraviolet- (UV) rated.
U DRIP TRAC for Foam Systems
Plastic Components' U-Drip Trac™ is designed for Exterior Insulated Finish Systems (EIFS) and other foam systems requiring moisture management.
The product has 3 mm (1/8 in.) diameter weep holes with 7.9 mm (5/16 in.) diameter holes on the 12.7 mm (1/2 in.) wide ‘shelf’ – making it ideal for moving moisture away from the foam system.
Some of its features are:
• 89 mm (3-1/2 in.) unpunched back flange with 6.35 mm (1/4 in.) diameter attachment holes spaced 152 mm (6 in.) on-center;
• supports 25 mm (1 in.) or greater foam board;
• extra wide ‘shelf’ for better keying; and
• easy to handle as well as ultraviolet- (UV) rated.
Additional Information
Catalog pageSpec sheet
All information listed in this section was submitted by the respective companies. Kenilworth Media Inc. and CSI cannot assume responsibility for errors of relevance, fact or omission.
