{"id":11044,"date":"2015-09-04T09:53:16","date_gmt":"2015-09-04T13:53:16","guid":{"rendered":"http:\/\/www.constructionspecifier.com\/?p=11044"},"modified":"2015-09-18T11:00:55","modified_gmt":"2015-09-18T15:00:55","slug":"tuning-into-sound-masking-technology","status":"publish","type":"post","link":"https:\/\/www.constructionspecifier.com\/tuning-into-sound-masking-technology\/","title":{"rendered":"Tuning into sound masking technology"},"content":{"rendered":"<figure id=\"attachment_11048\" aria-describedby=\"caption-attachment-11048\" style=\"width: 266px\" class=\"wp-caption alignleft\"><a href=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Opener_1.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-11048 \" src=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Opener_1.jpg\" alt=\"Opener_1\" width=\"266\" height=\"266\" srcset=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Opener_1.jpg 480w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Opener_1-150x150.jpg 150w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Opener_1-300x300.jpg 300w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Opener_1-50x50.jpg 50w\" sizes=\"auto, (max-width: 266px) 100vw, 266px\" \/><\/a><figcaption id=\"caption-attachment-11048\" class=\"wp-caption-text\"><span style=\"font-family: arial,helvetica,sans-serif; font-size: 8pt;\">Photos courtesy K.R. Moeller Associates Ltd. <\/span><\/figcaption><\/figure>\n<p><strong>by Niklas Moeller<br \/>\n<\/strong>From their early uses in commercial offices to relatively newer applications such as patient rooms in hospitals, sound masking systems are becoming a more common component of interior design.<\/p>\n<p>This technology distributes an engineered background sound throughout a facility, raising its ambient level in a controlled fashion. The principle is simple\u2014any noises below the new engineered level are covered up, while the impact of those still above is lessened because the degree of change between baseline and peak volumes is smaller. Similarly, conversations are either entirely masked or their intelligibility is reduced, improving speech privacy and decreasing various disruptions to occupants\u2019 concentration.<\/p>\n<p>Most people have experienced this effect when washing dishes at their kitchen sink while trying to talk to someone in the next room. They can tell the other person is speaking, but it is difficult to understand exactly what is being said because the running water has raised the ambient level in their area.<\/p>\n<p>When introducing a sound to a workplace, it is vital to ensure it is as comfortable and unobtrusive as possible. Otherwise, it risks becoming a source of irritation rather than a way to help solve an acoustic problem, as was the case with the original masking systems developed in the late 1960s, which used white noise generators.<\/p>\n<p><strong>White and pink noise<br \/>\n<\/strong>Though the term \u2018white noise\u2019 still tends to be used interchangeably with \u2018sound masking,\u2019 it is a very different type of sound than what is produced by modern masking technologies.<\/p>\n<p>White noise is a random broadband sound\u2014meaning it includes a wide range of frequencies\u2014that typically spans the audible range of 20 to 20,000 hertz (Hz). Graphical representations of this type of noise vary depending on the horizontal axis. If it shows individual frequencies, volume is constant. However, if the scale is in octaves, each octave\u2019s volume increases by three decibels (dB) because it contains double the number of frequencies than the one before it. As a general rule, the combined volume of any two sounds of equal volume is three dB higher. Thus, a graph depicting white noise shows either flat or increasing volume.<\/p>\n<p>Most people describe white noise as \u2018static\u2019 with an uncomfortable, hissing quality. Those old enough to remember analog televisions compare it to the \u2018snow\u2019 broadcast when the antenna lost the transmission signal and instead picked up electromagnetic noise. Unsurprisingly, these early masking systems were typically turned down or shut off soon after they were installed.<\/p>\n<figure id=\"attachment_11058\" aria-describedby=\"caption-attachment-11058\" style=\"width: 378px\" class=\"wp-caption alignright\"><a href=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_1.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-11058 \" src=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_1.jpg\" alt=\"Image_1\" width=\"378\" height=\"148\" srcset=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_1.jpg 480w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_1-300x118.jpg 300w\" sizes=\"auto, (max-width: 378px) 100vw, 378px\" \/><\/a><figcaption id=\"caption-attachment-11058\" class=\"wp-caption-text\"><span style=\"font-family: arial,helvetica,sans-serif; font-size: 10pt;\">A sound masking system consists of a series of loudspeakers installed in the ceiling, which distributes an engineered background sound throughout a facility. A well-tuned system is akin to softly blowing air. <span style=\"font-size: 8pt;\">Image courtesy Screen Solutions<\/span><\/span><\/figcaption><\/figure>\n<p>\u2018Pink noise\u2019 is another term often inaccurately substituted for \u2018sound masking.\u2019 This is also a random broadband sound, but instead of being equal in volume at each frequency, volume decreases at a rate of three dB per octave as frequency increases. However, because these decreases are offset by the increases created by the doubling of frequencies in each octave, pink noise is constant in volume per octave. Subjectively speaking, this sound is less hissy than white noise. On the other hand, the relatively louder low frequencies give it a rumbling quality, prompting comparison to the sound of a waterfall.<\/p>\n<p>Given these descriptions, it is understandable why modern masking systems do not emit white or pink noise, or in fact any of the other colors (<em>e.g.<\/em> brown, blue, or violet).<\/p>\n<p><strong>A sound masking spectrum<br \/>\n<\/strong>A sound masking spectrum\u2014often called a \u2018curve\u2019\u2014is engineered to balance effective acoustic control and comfort. It is usually provided by an acoustician or an independent party such as the National Research Council (NRC), rather than by the masking vendor. Though a masking curve includes a wide range of randomly generated frequencies, it is narrower than the full audible range\u2014typically from at least 100 to 5000 Hz, though sometimes as high as 10,000 Hz. Further, the volume of masking frequencies is not equal, and does not decrease at a constant rate as frequency increases.<\/p>\n<p>It is important to understand the curve defines what the system\u2019s measured output should be within the space. Regardless of how the system is designed, its \u2018out-of-the-box\u2019 settings, the size of its zones, or the orientation of its loudspeakers (<em>i.e.<\/em> upward- or downward-facing, sometimes called \u2018direct-field\u2019), the sound is influenced as it interacts with elements of the workplace interior, such as the layout, furnishings, and other variables. Therefore, in order for the sound to actually meet the desired masking curve, the system\u2019s volume and frequency settings have to be adjusted. In other words, it must be tuned for the particular environment in which it is installed.<\/p>\n<p>Tuning is handled by a qualified technician after the ceilings and all furnishings are in place, and with mechanical systems operating at normal daytime levels. Since conversations and activities can prevent accurate measurement, it is done prior to occupation or after hours. The technician uses a sound level meter to measure the masking sound at ear height. They analyze the results and adjust the system\u2019s volume and equalizer controls accordingly. This process is repeated as often as needed until they meet the curve at each tuning location.<!--nextpage--><\/p>\n<figure id=\"attachment_11062\" aria-describedby=\"caption-attachment-11062\" style=\"width: 335px\" class=\"wp-caption alignleft\"><a href=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_3.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-11062 \" src=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_3.jpg\" alt=\"Image_3\" width=\"335\" height=\"230\" srcset=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_3.jpg 480w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_3-300x206.jpg 300w\" sizes=\"auto, (max-width: 335px) 100vw, 335px\" \/><\/a><figcaption id=\"caption-attachment-11062\" class=\"wp-caption-text\"><span style=\"font-family: arial,helvetica,sans-serif; font-size: 10pt;\"><strong>Figure 1:<\/strong> Articulation Index (AI) tests were conducted between these two workstations to illustrate the impact tuning tolerances have on sound masking&#8217;s ability to improve speech privacy and, hence, the importance of closely and consistently meeting the specified sound masking spectrum or curve throughout the facility. <span style=\"font-size: 8pt;\">Photo courtesy K.R. Moeller Associates Ltd. <\/span><\/span><\/figcaption><\/figure>\n<p><strong>Achieving spatial uniformity<br \/>\n<\/strong>Most people compare the sound of a professionally tuned masking system to that of softly blowing air. However, there is much more significance to the tuning process than simply providing a pleasant auditory experience.<\/p>\n<p>A sound masking system\u2019s effectiveness is directly related to its ability to closely match the specified curve. Variations in the masking sound can profoundly impact performance, so a specification not only provides a target curve, but also a tolerance that indicates by how much the sound is allowed to deviate from that curve across the space. Achieving consistency is also important for comfort\u2014a uniform sound fades into the background more easily and occupants come to consider it a natural part of their space.<\/p>\n<p>Historically, tolerance has often been set to \u00b12 dBA (<em>i.e<\/em>. plus or minus two A-weighted decibels), giving an overall range of 4 dBA. However, advances in masking technology over the last few decades (described below) allow it to be as low as \u00b10.5 dBA, or an overall range of 1 dBA.<\/p>\n<p><strong>Measuring the impact<br \/>\n<\/strong>Articulation Index (AI) tests conducted between two workstations illustrate the importance of keeping tolerance as low as possible and consistently meeting the specified sound masking curve throughout the facility.<\/p>\n<p>In this example, two occupants sit approximately 4.7 m (15.5 ft) apart within an open plan. The partitions are 1.6 m (64 in.) in height and the ceiling tile is highly absorptive (Figure 1). However, without sound masking, the ambient level is only 40.6 dBA, and the listener can understand 85 percent of the other person\u2019s conversation. When masking is applied, comprehension quickly declines. In fact, for each decibel of increase in masking volume, comprehension drops by an average of 10 percent. With the masking set to 48 dBA (<em>i.e<\/em>. the typical maximum level for comfort) with a narrow tolerance of \u00b10.5 dBA, the listener can understand just 14 to 25 percent. When a broader tolerance of \u00b12 dBA is applied, he or she can understand up to 59 percent\u2014barely an improvement over the unmasked conditions (Figure 2).<\/p>\n<p>Though this example focuses solely on volume, variations in frequencies can similarly impact masking performance.<\/p>\n<figure id=\"attachment_11066\" aria-describedby=\"caption-attachment-11066\" style=\"width: 372px\" class=\"wp-caption alignright\"><a href=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_4.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-11066 \" src=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_4.jpg\" alt=\"Image_4\" width=\"372\" height=\"228\" srcset=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_4.jpg 480w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_4-300x184.jpg 300w\" sizes=\"auto, (max-width: 372px) 100vw, 372px\" \/><\/a><figcaption id=\"caption-attachment-11066\" class=\"wp-caption-text\"><span style=\"font-family: arial,helvetica,sans-serif; font-size: 10pt;\"><strong>Figure 2:<\/strong> Though a small amount of deviation is avoidable, the AI tests show too broad a tolerance (e.g. \u00b12 dBA) represents more than a 40 percent drop in sound masking performance. A tight tolerance of \u00b10.5 dBA ensures the masking effect is consistently experienced across the space.<\/span><\/figcaption><\/figure>\n<p><strong>Architectural evolution<br \/>\n<\/strong>The importance of spatial uniformity (<em>i.e.<\/em> achieving tight tuning tolerances throughout the space) is also emphasized by the evolution of sound masking architecture. Since the technology was first introduced in the 1960s, numerous advancements have been made in order to make tuning a more precise and efficient exercise.<\/p>\n<p><em>Centralized sound masking<br \/>\n<\/em>The earliest sound masking systems employed a centralized architecture. The name derives from the electronic components used to generate the masking sound (and provide volume, frequency control, and amplification), which are located within an equipment room or closet. The settings established at this central point are broadcast over a large number of loudspeakers\u2014sometimes as many as hundreds. While most offer limited analog volume control at each loudspeaker (usually 4 to 5 settings, in 3-dBA steps), their centralized design means large areas of the facility are nonetheless served by a single set of output settings that offer little or no option for local adjustment.<\/p>\n<p>Technicians have to set each large zone to a level that is best \u2018on average,\u2019 because they cannot make precise volume changes in specific areas. Variations in the acoustic conditions across the space and the impact of interior elements cause the masking sound to be too low in some areas and too high in others. If the technician raises the volume to address a performance deficiency in one area, they simultaneously increase it in others because of the sheer size of the zone, which affects occupant comfort. If the technician lowers the volume to boost comfort, they sacrifice speech privacy and noise control. This pattern repeats at unpredictable points across the space, which is why central system specifications typically allow large variations in overall masking volume. Tolerance is typically 4 to 6 decibels (<em>i.e.<\/em> \u00b12 to 3 dBA). Further, centralized architecture only provides a global frequency control for each large zone.<\/p>\n<p>Centralized architecture is also prone to a phenomenon called \u2018phasing,\u2019 or noticeable variations in the masking level. To try to avoid this problem, technicians employ a dual-channel, interlaced design, ensuring adjacent loudspeakers do not emit the same masking signal. However, it requires two sets of centrally located electronic equipment per zone, which raises the costs.<!--nextpage--><\/p>\n<figure id=\"attachment_11068\" aria-describedby=\"caption-attachment-11068\" style=\"width: 300px\" class=\"wp-caption alignleft\"><a href=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_2.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-11068\" src=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_2.jpg\" alt=\"Image_2\" width=\"300\" height=\"220\" srcset=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_2.jpg 480w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_2-300x220.jpg 300w\" sizes=\"auto, (max-width: 300px) 100vw, 300px\" \/><\/a><figcaption id=\"caption-attachment-11068\" class=\"wp-caption-text\"><span style=\"font-family: arial,helvetica,sans-serif; font-size: 10pt;\">A sound masking spectrum or curve is typically specified by an acoustician or supplied by an independent third party, such as the National Research Council, rather than by the sound masking system&#8217;s vendor. <span style=\"font-size: 8pt;\">Image courtesy NRC<\/span><\/span><\/figcaption><\/figure>\n<figure id=\"attachment_11069\" aria-describedby=\"caption-attachment-11069\" style=\"width: 300px\" class=\"wp-caption alignleft\"><a href=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_7.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-11069\" src=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_7.jpg\" alt=\"Image_7\" width=\"300\" height=\"211\" srcset=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_7.jpg 480w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_7-300x211.jpg 300w\" sizes=\"auto, (max-width: 300px) 100vw, 300px\" \/><\/a><figcaption id=\"caption-attachment-11069\" class=\"wp-caption-text\"><span style=\"font-family: arial,helvetica,sans-serif; font-size: 10pt;\">The greater the number of loudspeakers within each adjustment zone, the larger the area of compromise between masking effectiveness and occupant comfort, and the greater the number of people affected by it. <span style=\"font-size: 8pt;\">Image courtesy K.R. Moeller Associates Ltd. <\/span><\/span><\/figcaption><\/figure>\n<p><em>Decentralized sound masking<br \/>\n<\/em>Decentralized architecture emerged in the mid-1970s to address the problem of large zone size. Rather than place sound generation, volume, and frequency control in a central location, the electronics required for these functions are integrated into \u2018master\u2019 loudspeakers, which are distributed throughout the facility\u2014hence the \u2018decentralized\u2019 name.<\/p>\n<p>Each \u2018master\u2019 is connected to up to two \u2018satellite\u2019 loudspeakers, which repeat its settings. Therefore,<br \/>\na decentralized system\u2019s zones are only one to three loudspeakers in size (<em>i.e.<\/em> 30 to 62 m<sup>2<\/sup> [225 to 675 sf]). This distributed design inherently controls \u2018phasing.\u2019 Additionally, because each small zone offers fine volume control, local variations can be addressed, allowing more consistent and effective masking levels to be achieved across a facility. However, there are still limits to the adjustments that can be made with respect to frequency, which, in turn, impacts performance.<\/p>\n<p>Further, a technician must make changes directly at each \u2018master\u2019 loudspeaker, using either a screwdriver (<em>i.e<\/em>. with analog controls) or an infrared remote (<em>i.e<\/em>. with digital controls), making future adjustments challenging. It is advisable to measure performance and modify a sound masking system\u2019s settings when changes are made to the physical characteristics of the space (<em>e.g.<\/em> furnishings, partitions, ceiling, flooring) or to occupancy (<em>e.g.<\/em> relocating a call center or human resource functions into an area formerly occupied by accounting staff). The likelihood these types of changes will occur during a sound masking system\u2019s 10- to 20-year lifespan is almost certain. Therefore, a \u2018set-it-and-forget-it\u2019 approach is neither practical nor advised. Engineers had to develop a more practical way of adjusting the masking sound.<\/p>\n<p><em>Networked sound masking<br \/>\n<\/em>The first networked sound masking system was introduced more than a decade ago. The technology leverages the benefits of decentralized electronics, but networks the system\u2019s components together throughout the facility\u2014or across multiple facilities\u2014to provide centralized control of all functions via a control panel and\/or software. Changes can be made quickly following renovations, moving furniture or personnel, maintaining masking performance within the space without disrupting operations.<\/p>\n<p>When designed with small zones of one to three loudspeakers offering fine volume (<em>i.e<\/em>. 0.5 dBA) and frequency (<em>i.e.<\/em> 1\/3 octave) control, networked architecture can provide consistency in the overall masking volume not exceeding \u00b10.5 dBA. It also offers highly consistent masking spectrums, yielding much better tuning results than possible with previous architectures. Some networked sound masking systems can also be automatically tuned using a computer, which first measures the sound and then rapidly adjusts the masking output to match the specified curve.<\/p>\n<p>Today, there are several different product offerings within the centralized, decentralized, and networked categories. Some vendors have also utilized a hybrid design, implementing a decentralized architecture in closed rooms (<em>e.g.<\/em> private offices) and a centralized architecture in the open plan. However, the centralized architecture presents significant tuning challenges within the open plan\u2014an area where occupants rely on masking for speech privacy and noise control.<\/p>\n<p><strong>Updating performance standards<br \/>\n<\/strong>Sound masking is a critical design element for which there is not much room for error. Without a set of performance standards, the client may not achieve the expected level of speech privacy, noise control, and occupant comfort. An ASTM Subcommittee E33.02 on Speech Privacy (part of ASTM Committee E33 on Building and Environmental Acoustics) is currently working on such a standard: WK47433, <em>Performance Specification of Electronic Sound Masking When Used in Building Spaces<\/em>. It is also in the process of updating:<\/p>\n<ul>\n<li>ASTM E1130, <em>Test Method for Objective Measurement <\/em><em>of Speech Privacy in Open-plan Spaces Using Articulation Index<\/em>;<\/li>\n<li>ASTM E1374, <em>Guide for Open Office Acoustics and Applicable ASTM Standards<\/em>;<\/li>\n<li>ASTM E1573, <em>Test Method for Evaluating Masking <\/em><em>Sound in Open Offices Using A-weighted and One-Third Octave Band Sound Pressure Levels<\/em>; and<\/li>\n<li>ASTM E2638, <em>Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room.<\/em><\/li>\n<\/ul>\n<p>In the meantime, a minimum performance guideline is to require the masking sound to be measured in each 90-m<sup>2<\/sup> (1000-sf) open area and each closed room, at a height between 1.2 to 1.4 m (4 to 4.7 ft) from the floor (<em>i.e<\/em>. at ear height rather than directly below a loudspeaker). Some systems can adjust for smaller areas, but this is an acceptable baseline. Masking volume is typically set to between 40 and 48 dBA, and the results should be consistent within a range of \u00b10.5 dBA or less. The curve should be defined in third-octave bands and range from 100 to 5000 Hz (or as high as 10,000 Hz). It is a reasonable expectation to have \u00b12 dB variation in each frequency band.<\/p>\n<p>The vendor should adjust the masking sound within the area as needs dictate, and provide a final report verifying the results. The report should indicate areas where the masking sound is outside tolerance and why (<em>e.g.<\/em> noise from mechanical equipment or HVAC).<!--nextpage--><\/p>\n<figure id=\"attachment_11073\" aria-describedby=\"caption-attachment-11073\" style=\"width: 262px\" class=\"wp-caption alignleft\"><a href=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_9.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-11073\" src=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_9.jpg\" alt=\"Image_9\" width=\"262\" height=\"205\" srcset=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_9.jpg 480w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_9-300x234.jpg 300w\" sizes=\"auto, (max-width: 262px) 100vw, 262px\" \/><\/a><figcaption id=\"caption-attachment-11073\" class=\"wp-caption-text\"><span style=\"font-family: arial,helvetica,sans-serif; font-size: 10pt;\">A networked masking architecture uses &#8216;hubs&#8217; to house the electronics required for sound generation, volume, and frequency control. Changes can be made to any or all loudspeakers from a centrally located control panel and\/or software.<\/span><\/figcaption><\/figure>\n<figure id=\"attachment_11074\" aria-describedby=\"caption-attachment-11074\" style=\"width: 332px\" class=\"wp-caption alignleft\"><a href=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_8.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-11074\" src=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_8.jpg\" alt=\"Image_8\" width=\"332\" height=\"205\" srcset=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_8.jpg 480w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Image_8-300x185.jpg 300w\" sizes=\"auto, (max-width: 332px) 100vw, 332px\" \/><\/a><figcaption id=\"caption-attachment-11074\" class=\"wp-caption-text\"><span style=\"font-family: arial,helvetica,sans-serif; font-size: 10pt;\">A decentralized masking architecture uses &#8216;master&#8217; loudspeakers to house the electronics needed for sound generation, volume, and contour control. Adjustment zones are one to three loudspeakers in size. Local changes are made using a screwdriver or remote control.<\/span><\/figcaption><\/figure>\n<p><strong>Conclusion<br \/>\n<\/strong>Today\u2019s design trends and increased occupant densities mean clients may be more reliant than ever on sound masking to improve speech privacy and control noise in the workplace. The measurements and adjustments an acoustician or vendor makes after a sound masking system is installed are an essential part of the commissioning process.<\/p>\n<p>In all but extreme cases, it is impossible to know whether a sound is providing the expected level of masking. To make this determination, it must be ascertained whether the desired curve has been met throughout the facility. Clients can be assured of their sound masking system\u2019s performance by requesting a detailed report of the tuning results. This document should demonstrate the desired curve is consistently provided throughout the space, ensuring the system\u2019s benefits are enjoyed equally by all occupants.<\/p>\n<p><em>Niklas Moeller is the vice president of K.R. Moeller Associates Ltd., manufacturer of the LogiSon Acoustic Network sound masking system (logison.com). He has more than 25 years of experience in the sound masking field and also writes an acoustics blog at <a href=\"http:\/\/soundmaskingblog.com\" target=\"_blank\">soundmaskingblog.com<\/a>. He can be reached at <a href=\"mailto:nmoeller@logison.com\" target=\"_blank\">nmoeller@logison.com<\/a>.<\/em><\/p>\n","protected":false},"excerpt":{"rendered":"<p>From their early uses in commercial offices to relatively newer applications such as patient rooms in hospitals, sound masking systems are becoming a more common component of interior design. This technology distributes an engineered background sound throughout a facility, raising its ambient level in a controlled fashion. <\/p>\n","protected":false},"author":5,"featured_media":11048,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[520,179,449,200,355,466],"tags":[624,1873,1215,627],"class_list":["post-11044","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-features","category-masterformat","category-uniformat","category-27-00-00-communications","category-27-50-00-distributed-communications-and-monitoring-systems","category-d30heating-ventilation-and-air-conditioning","tag-27-51-19-sound-masking-systems","tag-d3070-special-purpose-hvac-systems","tag-division-27","tag-sound-masking","entry"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.8 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Tuning into sound masking technology - The Construction Specifier<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.constructionspecifier.com\/tuning-into-sound-masking-technology\/\" \/>\n<link rel=\"next\" href=\"https:\/\/www.constructionspecifier.com\/tuning-into-sound-masking-technology\/2\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Tuning into sound masking technology - The Construction Specifier\" \/>\n<meta property=\"og:description\" content=\"From their early uses in commercial offices to relatively newer applications such as patient rooms in hospitals, sound masking systems are becoming a more common component of interior design. This technology distributes an engineered background sound throughout a facility, raising its ambient level in a controlled fashion.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.constructionspecifier.com\/tuning-into-sound-masking-technology\/\" \/>\n<meta property=\"og:site_name\" content=\"The Construction Specifier\" \/>\n<meta property=\"article:published_time\" content=\"2015-09-04T13:53:16+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2015-09-18T15:00:55+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Opener_1.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"480\" \/>\n\t<meta property=\"og:image:height\" content=\"480\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Katie Daniel\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Katie Daniel\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"14 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/tuning-into-sound-masking-technology\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/tuning-into-sound-masking-technology\\\/\"},\"author\":{\"name\":\"Katie Daniel\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/person\\\/34e59e3f0bf081d4b975ae9b2c1764f3\"},\"headline\":\"Tuning into sound masking technology\",\"datePublished\":\"2015-09-04T13:53:16+00:00\",\"dateModified\":\"2015-09-18T15:00:55+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/tuning-into-sound-masking-technology\\\/\"},\"wordCount\":2871,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/tuning-into-sound-masking-technology\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2015\\\/09\\\/Opener_1.jpg\",\"keywords\":[\"27 51 19\u2013Sound Masking Systems\",\"D3070 Special Purpose HVAC Systems\",\"Division 27\",\"Sound masking\"],\"articleSection\":[\"Features\",\"MasterFormat\",\"UniFormat\",\"27 00 00 Communications\",\"27 50 00 Distributed Communications and Monitoring Systems\",\"D30\u2212Heating, Ventilation, and Air-conditioning\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.constructionspecifier.com\\\/tuning-into-sound-masking-technology\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/tuning-into-sound-masking-technology\\\/\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/tuning-into-sound-masking-technology\\\/\",\"name\":\"Tuning into sound masking technology - The Construction Specifier\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/tuning-into-sound-masking-technology\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/tuning-into-sound-masking-technology\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2015\\\/09\\\/Opener_1.jpg\",\"datePublished\":\"2015-09-04T13:53:16+00:00\",\"dateModified\":\"2015-09-18T15:00:55+00:00\",\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.constructionspecifier.com\\\/tuning-into-sound-masking-technology\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/tuning-into-sound-masking-technology\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2015\\\/09\\\/Opener_1.jpg\",\"contentUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2015\\\/09\\\/Opener_1.jpg\",\"width\":480,\"height\":480},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#website\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/\",\"name\":\"The Construction Specifier\",\"description\":\"Solutions for the Construction Industry\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.constructionspecifier.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#organization\",\"name\":\"The Construction Specifier\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/CS_Logo_BW_LR.jpg\",\"contentUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/CS_Logo_BW_LR.jpg\",\"width\":288,\"height\":70,\"caption\":\"The Construction Specifier\"},\"image\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/person\\\/34e59e3f0bf081d4b975ae9b2c1764f3\",\"name\":\"Katie Daniel\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/61581f197b5eb954385d63e8f4a68b6624a13223539469ba68b02582f220045a?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/61581f197b5eb954385d63e8f4a68b6624a13223539469ba68b02582f220045a?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/61581f197b5eb954385d63e8f4a68b6624a13223539469ba68b02582f220045a?s=96&d=mm&r=g\",\"caption\":\"Katie Daniel\"},\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/author\\\/katie-daniel\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Tuning into sound masking technology - The Construction Specifier","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.constructionspecifier.com\/tuning-into-sound-masking-technology\/","next":"https:\/\/www.constructionspecifier.com\/tuning-into-sound-masking-technology\/2\/","og_locale":"en_US","og_type":"article","og_title":"Tuning into sound masking technology - The Construction Specifier","og_description":"From their early uses in commercial offices to relatively newer applications such as patient rooms in hospitals, sound masking systems are becoming a more common component of interior design. This technology distributes an engineered background sound throughout a facility, raising its ambient level in a controlled fashion.","og_url":"https:\/\/www.constructionspecifier.com\/tuning-into-sound-masking-technology\/","og_site_name":"The Construction Specifier","article_published_time":"2015-09-04T13:53:16+00:00","article_modified_time":"2015-09-18T15:00:55+00:00","og_image":[{"width":480,"height":480,"url":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Opener_1.jpg","type":"image\/jpeg"}],"author":"Katie Daniel","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Katie Daniel","Est. reading time":"14 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.constructionspecifier.com\/tuning-into-sound-masking-technology\/#article","isPartOf":{"@id":"https:\/\/www.constructionspecifier.com\/tuning-into-sound-masking-technology\/"},"author":{"name":"Katie Daniel","@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/person\/34e59e3f0bf081d4b975ae9b2c1764f3"},"headline":"Tuning into sound masking technology","datePublished":"2015-09-04T13:53:16+00:00","dateModified":"2015-09-18T15:00:55+00:00","mainEntityOfPage":{"@id":"https:\/\/www.constructionspecifier.com\/tuning-into-sound-masking-technology\/"},"wordCount":2871,"commentCount":0,"publisher":{"@id":"https:\/\/www.constructionspecifier.com\/#organization"},"image":{"@id":"https:\/\/www.constructionspecifier.com\/tuning-into-sound-masking-technology\/#primaryimage"},"thumbnailUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Opener_1.jpg","keywords":["27 51 19\u2013Sound Masking Systems","D3070 Special Purpose HVAC Systems","Division 27","Sound masking"],"articleSection":["Features","MasterFormat","UniFormat","27 00 00 Communications","27 50 00 Distributed Communications and Monitoring Systems","D30\u2212Heating, Ventilation, and Air-conditioning"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.constructionspecifier.com\/tuning-into-sound-masking-technology\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.constructionspecifier.com\/tuning-into-sound-masking-technology\/","url":"https:\/\/www.constructionspecifier.com\/tuning-into-sound-masking-technology\/","name":"Tuning into sound masking technology - The Construction Specifier","isPartOf":{"@id":"https:\/\/www.constructionspecifier.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.constructionspecifier.com\/tuning-into-sound-masking-technology\/#primaryimage"},"image":{"@id":"https:\/\/www.constructionspecifier.com\/tuning-into-sound-masking-technology\/#primaryimage"},"thumbnailUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Opener_1.jpg","datePublished":"2015-09-04T13:53:16+00:00","dateModified":"2015-09-18T15:00:55+00:00","inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.constructionspecifier.com\/tuning-into-sound-masking-technology\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.constructionspecifier.com\/tuning-into-sound-masking-technology\/#primaryimage","url":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Opener_1.jpg","contentUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2015\/09\/Opener_1.jpg","width":480,"height":480},{"@type":"WebSite","@id":"https:\/\/www.constructionspecifier.com\/#website","url":"https:\/\/www.constructionspecifier.com\/","name":"The Construction Specifier","description":"Solutions for the Construction Industry","publisher":{"@id":"https:\/\/www.constructionspecifier.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.constructionspecifier.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.constructionspecifier.com\/#organization","name":"The Construction Specifier","url":"https:\/\/www.constructionspecifier.com\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2017\/09\/CS_Logo_BW_LR.jpg","contentUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2017\/09\/CS_Logo_BW_LR.jpg","width":288,"height":70,"caption":"The Construction Specifier"},"image":{"@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/person\/34e59e3f0bf081d4b975ae9b2c1764f3","name":"Katie Daniel","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/61581f197b5eb954385d63e8f4a68b6624a13223539469ba68b02582f220045a?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/61581f197b5eb954385d63e8f4a68b6624a13223539469ba68b02582f220045a?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/61581f197b5eb954385d63e8f4a68b6624a13223539469ba68b02582f220045a?s=96&d=mm&r=g","caption":"Katie Daniel"},"url":"https:\/\/www.constructionspecifier.com\/author\/katie-daniel\/"}]}},"views":15791,"publishpress_future_workflow_manual_trigger":{"enabledWorkflows":[]},"_links":{"self":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts\/11044","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/users\/5"}],"replies":[{"embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/comments?post=11044"}],"version-history":[{"count":20,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts\/11044\/revisions"}],"predecessor-version":[{"id":11269,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts\/11044\/revisions\/11269"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/media\/11048"}],"wp:attachment":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/media?parent=11044"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/categories?post=11044"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/tags?post=11044"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}