{"id":14505,"date":"2013-01-06T14:25:11","date_gmt":"2013-01-06T19:25:11","guid":{"rendered":"http:\/\/www.constructionspecifier.com\/?p=14505"},"modified":"2017-01-20T14:22:07","modified_gmt":"2017-01-20T19:22:07","slug":"designing-metal-ceilings-for-exterior-soffits","status":"publish","type":"post","link":"https:\/\/www.constructionspecifier.com\/designing-metal-ceilings-for-exterior-soffits\/","title":{"rendered":"Designing metal ceilings for exterior soffits"},"content":{"rendered":"<figure id=\"attachment_14512\" aria-describedby=\"caption-attachment-14512\" style=\"width: 373px\" class=\"wp-caption alignright\"><a href=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_MA_Fenway_Planostile.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\" wp-image-14512\" src=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_MA_Fenway_Planostile.jpg\" alt=\"Images courtesy Chicago Metallic Corporation\" width=\"373\" height=\"262\" srcset=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_MA_Fenway_Planostile.jpg 800w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_MA_Fenway_Planostile-300x211.jpg 300w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_MA_Fenway_Planostile-624x438.jpg 624w\" sizes=\"auto, (max-width: 373px) 100vw, 373px\" \/><\/a><figcaption id=\"caption-attachment-14512\" class=\"wp-caption-text\"><em><span style=\"font-size: 8pt;\">Images courtesy Chicago Metallic Corporation<\/span><\/em><\/figcaption><\/figure>\n<p><strong>by Edward Williams<br \/>\n<\/strong>Exterior soffits perform essential functions for ventilating, shading, and directing water away from a building. Regardless of geography or climate, exterior soffits are subjected to positive and negative wind loads. to protect occupants and their surroundings from damage, building codes have revised provisions for wind speeds and risk categories.<\/p>\n<p>Metal ceiling systems can meet the performance challenges of exterior soffits, as well as support buildings\u2019 aesthetic and sustainability goals. Constructed mostly of aluminum, these assemblies are durable and do not deteriorate or deform. Conventional materials in exterior soffits include:<\/p>\n<ul>\n<li>gypsum board and plaster;<\/li>\n<li>wood and plywood;<\/li>\n<li>vinyl; and<\/li>\n<li>exterior insulation and finish systems (EIFS).<\/li>\n<\/ul>\n<p>Aluminum\u2019s durability has been proven in daily use and extreme conditions, from the Arctic to Gulf Coast. As it has the strength of steel at a third to half the weight, it lightens a structures\u2019 \u2018dead load\u2019 and makes shipping, handling, and installation easier.<\/p>\n<p>Aluminum\u2019s physical properties allow metal ceiling panels to be formed into squares, linear planks, and other geometric shapes. Available in various styles, thicknesses, and finishes, the panels convey a unified appearance in both interior and exterior applications.<\/p>\n<p>Metal panels may be installed as flat ceilings that carry the intended design from a building\u2019s interior lobby through to exterior soffits. This softens the transition from interior and exterior environments and presents a clean, unbroken look. Many designers appreciate this visual continuity, particularly in highly transparent buildings with large glass openings. For grand, curving entrances, the metal panels can be either field-fabricated at the jobsite or specified with factory-fabricated radius systems to create barrel-vaulted canopies.<\/p>\n<figure id=\"attachment_14515\" aria-describedby=\"caption-attachment-14515\" style=\"width: 350px\" class=\"wp-caption alignleft\"><a href=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/soffit_Chart.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\" wp-image-14515\" src=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/soffit_Chart.jpg\" alt=\"The above chart is an example of what a manufacturer of 102 by 102 mm (4 by 4 in.), 0.5-mm (0.02-in.) thick metal ceiling panels in an exterior soffit may show to designers, architects, specifiers, and interior contractors.\" width=\"350\" height=\"225\" srcset=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/soffit_Chart.jpg 1530w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/soffit_Chart-300x193.jpg 300w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/soffit_Chart-1000x642.jpg 1000w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/soffit_Chart-624x401.jpg 624w\" sizes=\"auto, (max-width: 350px) 100vw, 350px\" \/><\/a><figcaption id=\"caption-attachment-14515\" class=\"wp-caption-text\"><span style=\"font-size: 10pt;\">The above chart is an example of what a manufacturer of 102 by 102 mm (4 by 4 in.), 0.5-mm (0.02-in.) thick metal ceiling panels\u00a0in an exterior soffit may show to designers, architects, specifiers, and interior contractors.<\/span><\/figcaption><\/figure>\n<p><b>Proper installation, enduring performance<\/b><br \/>\nAs a factory-fabricated system, exterior metal ceiling components are pre-engineered, pre-finished, and ready for installation. These systems do not require extra labor, time, or materials to frame, sheet, or paint the soffit onsite. There is no need to second-guess how the ceiling ties to the structure above it when the responsibility for engineering is defined in the specification. The ceiling can be engineered, fabricated, and verified to meet the performance requirements and simplify installation\u2014from the spacing of supports to the screw placement.<\/p>\n<p>Metal ceiling systems accommodate lighting, air-diffusers, audio accessories, and structural items that must pass through the soffit assembly. Once installed, the plenum remains accessible for future care and cleaning. With proper closures, exterior metal soffits are inhospitable environments for pests compared to organic materials which can attract ants, termites, wasps, and other insects. Aluminum is impermeable to air, water, light, and microorganisms. Metal ceiling systems neither accumulate moisture nor contain volatile organic compounds (VOCs) or substances supporting mold or microbial growth.<!--nextpage--><\/p>\n<figure id=\"attachment_14517\" aria-describedby=\"caption-attachment-14517\" style=\"width: 300px\" class=\"wp-caption alignright\"><a href=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_DE_ChristianaMall_Planostile.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"size-medium wp-image-14517\" src=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_DE_ChristianaMall_Planostile-300x199.jpg\" alt=\"To revitalize Christiana Mall in Newark, Delaware, owners relied on multiple metal ceiling systems. Designed to withstand positive and negative wind pressure and extreme weather, snap-in metal panels were painted in a durable silver finish and installed as soffits under the exterior canopies.\" width=\"300\" height=\"199\" srcset=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_DE_ChristianaMall_Planostile-300x199.jpg 300w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_DE_ChristianaMall_Planostile-624x414.jpg 624w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_DE_ChristianaMall_Planostile.jpg 800w\" sizes=\"auto, (max-width: 300px) 100vw, 300px\" \/><\/a><figcaption id=\"caption-attachment-14517\" class=\"wp-caption-text\"><span style=\"font-size: 10pt;\">To revitalize Christiana Mall in Newark, Delaware, owners relied on multiple metal ceiling systems. Designed to withstand positive and negative wind pressure and extreme weather, snap-in metal panels were painted in a durable silver finish and installed as soffits under the exterior canopies.<\/span><\/figcaption><\/figure>\n<p>Metal ceiling systems can easily accommodate ventilation measures for cooling the plenum and subsequently the roof systems\u2014the panels can be perforated or vents can be installed in them. In the case of linear systems, perforations can be used and\/or the spaces between panels can be left open for ventilation.<\/p>\n<p>Made of non-combustible material, exterior metal soffit systems are typically Class A fire-rated and rarely included in Underwriters Laboratories (UL) time-rated designs. While aluminum is inherently corrosion resistant, care should be taken when specifying materials and finishes in coastal areas. A metallurgist and manufacturer should be consulted before using these systems in warm, humid environments where salt spray occurs. Also, in areas where there are wide temperature swings, specifiers must consider thermal expansion in their design.<\/p>\n<p>Different metals and materials expand and contract at different rates. For example, the linear expansion co-efficient of the International Alloy Designation System\u2019s 3000 series aluminum is approximately 23.4 x 10<sup>-6 <\/sup>cm\/cm &#8211; C (13.0 x 10<sup>-6<\/sup>in.\/in.- F). This equates to about a 5 mm (0.2 in.) change in length in a 15.2-m (50-ft) run of metal when there is a temperature change of 4 C (25 F).<\/p>\n<p><b>Codes and criteria<\/b><br \/>\nRegardless of size, location, or occupancy, exterior metal soffits should meet necessary building codes and criteria. The 2012 <i>International Building Code<\/i> (<i>IBC<\/i>) and 2010 <i>Florida Building Code<\/i> (<i>FBC<\/i>) are two recent examples where wind load design requirements and related descriptions have been updated. These revisions are largely due to the 2010 edition of American Society of Civil Engineers\/Structural Engineering Institute (ASCE\/SEI) 7, <i>Minimum Design Loads for <\/i><i>Buildings and Other Structures<\/i>.<\/p>\n<p>In particular, ASCE\/SEI 7-10 revised the methodology and terminology used for establishing basic wind speed. These revisions include:<\/p>\n<ul>\n<li>Strength Design (SD), or ultimate, wind speeds replacing the former use of Allowable Stress Design (ASD) wind speeds (three difference <a href=\"http:\/\/publicecodes.cyberregs.com\/icod\/ibc\/2012\/icod_ibc_2012_16_par090.htm\" target=\"_blank\">wind speed maps<\/a> are provided);<\/li>\n<li>deletion of Importance Factors, previously used to determine basic design wind speed;<\/li>\n<li>switching of Exposure Category for hurricane-prone regions from Exposure C to D (2012 <i>IBC<\/i> also notes an exception for Office of Statewide Health Planning and Development [<a href=\"http:\/\/www.oshpd.ca.gov\" target=\"_blank\">OSHPD<\/a>] projects to comply with Exposure C, unless justification can be made for <a href=\"http:\/\/publicecodes.cyberregs.com\/icod\/ibc\/index.htm\" target=\"_blank\">Exposure B<\/a>); and<\/li>\n<li>changes to the building classifications from the previous Occupancy Category to the revised<br \/>\nRisk Category.<\/li>\n<\/ul>\n<p>The authority having jurisdiction (AHJ) determines the building\u2019s Risk Category. ASCE 7-10 uses three basic wind speed maps to determine a buildings\u2019 Risk Category. The category designations are:<\/p>\n<ul>\n<li>Category I: buildings representing a low risk to human life in the event of a failure;<\/li>\n<li>Category II: most residential, commercial, and industrial buildings; and<\/li>\n<li>Category III and IV: buildings where failure could pose a substantial risk to human life or essential service facilities.<\/li>\n<\/ul>\n<p>A registered architect or professional engineer should review and determine the wind loads. Based on revised calculations and wind speeds shown in ASCE\/SEI 7-10\u2019s updated maps, these speeds can be converted into appropriate load requirements for components and cladding. Building codes\u2019 components and cladding sections typically address exterior soffits.<\/p>\n<p>Construction projects must meet a Seismic Design Category (SDC) as specified by an engineer or architect. Each category determines specific product performance and installation methods required by code to withstand certain levels of seismic activity.\u00a0(For more on earthquakes and soffits, see \u201cSpecifying Seismic Ceiling Safety\u201d by Tony Ingratta, in the September 2012 issue of <i>The Construction Specifier<\/i>.\u00a0To read the article, visit <a href=\"http:\/\/www.constructionspecifier.com\" target=\"_blank\">www.constructionspecifier.com<\/a> and select \u201cArchives.\u201d)<\/p>\n<figure id=\"attachment_14519\" aria-describedby=\"caption-attachment-14519\" style=\"width: 300px\" class=\"wp-caption alignleft\"><a href=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_TN_VetNatlCemetary10.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"size-medium wp-image-14519\" src=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_TN_VetNatlCemetary10-300x225.jpg\" alt=\"To maintain intended appearances and long-lasting performance specifying metal ceiling systems in exterior applications\u2014such as the Veterans National Cemetery in Memphis, Tennessee\u2014is important. Photos courtesy Chicago Metallic Corporation\" width=\"300\" height=\"225\" srcset=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_TN_VetNatlCemetary10-300x225.jpg 300w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_TN_VetNatlCemetary10-624x468.jpg 624w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_TN_VetNatlCemetary10.jpg 800w\" sizes=\"auto, (max-width: 300px) 100vw, 300px\" \/><\/a><figcaption id=\"caption-attachment-14519\" class=\"wp-caption-text\"><span style=\"font-size: 10pt;\">To maintain intended appearances and long-lasting performance specifying metal ceiling systems in exterior applications\u2014such as the Veterans National Cemetery in Memphis, Tennessee\u2014is important.<\/span><br \/><span style=\"font-size: 8pt;\">Photos courtesy Chicago Metallic Corporation<\/span><\/figcaption><\/figure>\n<p><b>Positive and negative pressures<\/b><br \/>\nSpecifiers should request metal ceiling manufacturers\u2019 wind load technical data for the complete exterior soffit system, including suspension, panels, and structural supports. Also, laboratory test reports and assembly designs indicating both positive and negative air pressures should be requested.<\/p>\n<p>When wind interacts with a building, both positive (uplift) and negative (suction) pressures simultaneously occur. These pressures also affect allowable carrier and strut spacing for metal ceiling systems in exterior soffits. Spacing requirements vary for different panel sizes, material thickness, manufacturers, and applications.<\/p>\n<p>Collaborating with the manufacturer early in the design and specification process minimize confusion, ensuring long-lasting performance. By communicating the desired aesthetic, performance, schedule, and budget requirements early in the project, the manufacturer can ensure the product is engineered to meet these needs and can work with the installing contractor to guide them in proper installation, documentation, and inspection. UL conducts laboratory testing of metal ceiling systems for exterior soffits to verify a manufacturer\u2019s claims meet industry standards for resistance to uplift forces.<!--nextpage--><\/p>\n<figure id=\"attachment_14521\" aria-describedby=\"caption-attachment-14521\" style=\"width: 338px\" class=\"wp-caption alignright\"><a href=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_FL_USFMarshallStudCtr1_Planar.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\" wp-image-14521\" src=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_FL_USFMarshallStudCtr1_Planar-300x200.jpg\" alt=\"The new Marshall Student Center at the University of South Florida in Tampa features soffits comprising linear metal ceiling assemblies. These are engineered to resist southeastern winds and provide shade from the heat.\" width=\"338\" height=\"225\" srcset=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_FL_USFMarshallStudCtr1_Planar-300x200.jpg 300w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_FL_USFMarshallStudCtr1_Planar-624x416.jpg 624w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_FL_USFMarshallStudCtr1_Planar.jpg 800w\" sizes=\"auto, (max-width: 338px) 100vw, 338px\" \/><\/a><figcaption id=\"caption-attachment-14521\" class=\"wp-caption-text\"><span style=\"font-size: 10pt;\">The new Marshall Student Center at the University of South Florida in Tampa features soffits comprising linear metal ceiling assemblies. These are engineered to resist southeastern winds and provide shade from the heat.<\/span><\/figcaption><\/figure>\n<p><b>UL ratings<\/b><br \/>\nPer UL\u2019s classification for \u201cRoofing Systems, Uplift Resistance\u201d (<i>i.e.<\/i> TGKX):<\/p>\n<p><span style=\"font-family: georgia, palatino, serif;\">Roof Deck Constructions Classified for Uplift Resistance have been investigated for damageability from both external and internal pressures on the deck associated with high velocity winds. \u2026ANSI\/UL 580. The ANSI\/UL 580 test method subjects a 3.05 x 3.05-m [10 x 10-ft] test sample to various static and oscillating air pressures to index performance under uplift loads imposed on roof decks.<\/span><\/p>\n<p><span style=\"font-family: georgia, palatino, serif;\">The magnitude of the wind velocity across a roof deck and the resulting uplift pressures on a roof deck are dependent upon many factors such as wind gusts, the shape of the roof deck, edge configuration and the landscape surrounding the roof deck installation.\u00a0(Search \u201c<a href=\"http:\/\/database.ul.com\/cgi-bin\/XYV\/cgifind.new\/LISEXT\/1FRAME\/index.html\" target=\"_blank\">TGKX Guide Info Roof Deck Constructions<\/a>.\u201d)<\/span><\/p>\n<p>A UL 580 Class 30 designation indicates a system has been tested and will resist a 1436-Pa (30-psf) wind pressure (positive and negative) when installed in accordance with ASTM C636-04, <i>Standard Practice <\/i><i>for Installation of Metal Ceiling Suspension Systems for <\/i><i>Acoustical Tile and Lay-in Panels<\/i>, and the manufacturer\u2019s instructions. In addition to laboratory testing, UL audits the company\u2019s manufacturing process to ensure the products are made as tested.<\/p>\n<p>As an example of a Class 30 UL-rated exterior metal soffit system, UL Construction No. 630 details the following components (asterisks mark those components bearing the UL classification mark)\u00a0(This information was taken from UL Construction\u00a0No. 630, \u201cRoof Deck Constructions.\u201d):<\/p>\n<p><i>Steel framing members<sup>*<\/sup><\/i><br \/>\nThe system used to support the soffit consists of the following components:<\/p>\n<ul>\n<li>main runner:<sup> *<\/sup> nominally 3.6 m long by 19 mm wide (12 ft by 3\/4 in.) spaced 610 mm (24 in.) on center (oc) supported by hanger wire (Item 2) spaced 1220 mm (48 in.) oc;<\/li>\n<li>cross tees:<sup> *<\/sup> nominally 610 mm (24 in.) long; spaced 1220 mm (48 in.) oc; installed perpendicular to main runner;<\/li>\n<li>perimeter channel:<sup> *<\/sup> channel-shaped 63.5 mm (2 1\/2 in.) deep with 19-mm (3\/4-in.) legs; 0.6-mm (0.02-in.) thick aluminum; fastened to walls with 25-mm (1-in.) long steel screws spaced maximum 610 mm (24 in.) oc;<\/li>\n<li>main runners (Item 1A) and cross tees (Item 1B) attached to top leg of channel using one #7 minimum size, 11-mm (7\/16-in.) screw into bulb of component;<\/li>\n<li>hold-down insert: channel-shaped hold-down insert 63 mm (2 15\/32 in.) deep with 19-mm (3\/4-in.) legs, 0.6-mm (0.02-in.) thick aluminum, nested inside perimeter channel (Item 1C) to hold down perimeter panels;<\/li>\n<li>inserts fastened to wall using two 25-mm (1-in.) long steel screws spaced 305 mm (12 in.) oc; and<\/li>\n<li>downbrace: as shown in Figure 1, downbraces are spaced 1219 mm (48 in.) oc along main runners and fastened to main runner with two 4.2-mm (0.17-in.) 8-gauge by minimum-sized 12.7-mm (1\/2-in.) self-drilling screws; the downbrace can be notched to fit over bulb of main runner as an alternative to method for uplift applications (Item 1Eb), and the optional downbrace clip used in conjunction with downbrace and main runner must be fastened with six 3.8 mm (0.15 in.) 7-gauge by 11.1-mm (7\/16-in.) screws.<\/li>\n<\/ul>\n<figure id=\"attachment_14522\" aria-describedby=\"caption-attachment-14522\" style=\"width: 428px\" class=\"wp-caption alignleft\"><a href=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/soffit_Figure-1.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\" wp-image-14522\" src=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/soffit_Figure-1-1000x535.jpg\" alt=\"This chart shows suggested downbraces and allowable lengths noted for a Class 30 UL-rated exterior metal soffit system. Authorities having jurisdiction (AHJs) should be consulted in all cases as to the particular requirements of a project and system. Data courtesy Underwriters Laboratories (UL) Construction No. 630\" width=\"428\" height=\"229\" srcset=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/soffit_Figure-1-1000x535.jpg 1000w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/soffit_Figure-1-300x161.jpg 300w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/soffit_Figure-1-624x334.jpg 624w\" sizes=\"auto, (max-width: 428px) 100vw, 428px\" \/><\/a><figcaption id=\"caption-attachment-14522\" class=\"wp-caption-text\"><span style=\"font-size: 10pt;\">This chart shows suggested downbraces and allowable lengths noted for a Class 30 UL-rated exterior metal soffit system. Authorities having jurisdiction (AHJs) should be consulted in all cases as to the particular requirements of a project and system.<\/span><br \/><em><span style=\"font-size: 8pt;\">Data courtesy Underwriters Laboratories (UL) Construction No. 630<\/span><\/em><\/figcaption><\/figure>\n<p><i>Hanger wire<\/i><br \/>\nLocated directly over main runners spaced 1219 mm (48 in.) oc, the hanger wire is fastened to supports (Item 3) with an eyebolt or other appropriate connector the diameter of wire is to be 2.7 mm (0.12 in.), 12 gauge. Hanger wire must coincide with compression post (Item 1E) locations.<\/p>\n<p><i>Supports<\/i><br \/>\nSupports are any structural steel, wood, or other type member capable of supporting soffit construction at a spacing as required to support soffit load and withstand uplift load.<\/p>\n<p><i>Panel<sup>*<\/sup><\/i><br \/>\nPanels must be 610 x 610 mm (24 x 24 in.), 0.5-mm (0.02-in.) thick steel, or 0.7-mm (0.03-in.) thick aluminum. End-joints are perpendicular to main runners (Item 1A). Side-joints are centered on the face of the main runners. Panel side-joint legs snap into face of main runners.<\/p>\n<p><i>Panel retention clip<sup>*<\/sup><\/i><br \/>\nThe panel retention clip must have a minimum diameter of 1.6-mm (0.06-in.) steel wire. Clips fasten panel end-joint legs to main runners and occur at all panel end-joint leg intersections with main runner.<!--nextpage--><\/p>\n<figure id=\"attachment_14525\" aria-describedby=\"caption-attachment-14525\" style=\"width: 300px\" class=\"wp-caption alignleft\"><a href=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_FL_Tampa_PMacro.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"size-medium wp-image-14525\" src=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_FL_Tampa_PMacro-300x244.jpg\" alt=\"The student center includes materials with completely recycled content such as the soffits\u2019 metal systems and suspensions, which typically contain 100 percent post-consumer recycled content. \" width=\"300\" height=\"244\" srcset=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_FL_Tampa_PMacro-300x244.jpg 300w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_FL_Tampa_PMacro-624x507.jpg 624w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_FL_Tampa_PMacro.jpg 800w\" sizes=\"auto, (max-width: 300px) 100vw, 300px\" \/><\/a><figcaption id=\"caption-attachment-14525\" class=\"wp-caption-text\"><span style=\"font-size: 10pt;\">The student center includes materials with completely recycled content such as the soffits\u2019 metal systems and suspensions, which typically contain 100 percent post-consumer recycled content.<\/span><\/figcaption><\/figure>\n<p><b>\u2018Green\u2019 design and colorful finishes<\/b><br \/>\nThe exterior metal soffits\u2019 composition not only offers enduring performance and aesthetics, it also offers sustainable design attributes. According to the Aluminum Association (AA), the material is infinitely recyclable with 75 percent of all aluminum ever smelted still in use. Metal ceiling systems can approach 100 percent recycled material content and are 100 percent recyclable at the end of their usefulness as an exterior soffit. Additionally, it is currently estimated that more than 90 percent of aluminum used in buildings is recycled after service, making it one of the most recycled building materials in the world.<\/p>\n<p>Further supporting green goals, the aluminum panels may be finished with baked enamels, anodize or powder-coated paint containing no VOCs. Functional, painted coatings in standard black, white, and silver colors remain the most popular choices, but a broad palette of hues and patterns are available for bold designs. Solid, painted finishes span the spectrum of amethyst to emerald, or true blue to cardinal red. Patterned, painted finishes include those mimicking wood grain or metal. Anodize finishes emphasize a sleek, metallic appearance in silver to copper tones and in reflective chrome or brass.<\/p>\n<figure id=\"attachment_14526\" aria-describedby=\"caption-attachment-14526\" style=\"width: 302px\" class=\"wp-caption alignright\"><a href=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_OK_TransitStation_Planar.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\" wp-image-14526\" src=\"http:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_OK_TransitStation_Planar-240x300.jpg\" alt=\"Positive and negative wind load test reports should be requested for exterior metal ceiling applications, such as the soffits for this Oklahoma Transit Station.\" width=\"302\" height=\"378\" srcset=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_OK_TransitStation_Planar-240x300.jpg 240w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_OK_TransitStation_Planar-624x779.jpg 624w, https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_OK_TransitStation_Planar.jpg 641w\" sizes=\"auto, (max-width: 302px) 100vw, 302px\" \/><\/a><figcaption id=\"caption-attachment-14526\" class=\"wp-caption-text\"><span style=\"font-size: 10pt;\">Positive and negative wind load test reports should be requested for exterior metal ceiling applications, such as the soffits for this Oklahoma Transit Station.<\/span><\/figcaption><\/figure>\n<p><b>Care and cleaning<\/b><br \/>\nThroughout the building\u2019s life, the finished metal soffits require minimal maintenance to retain the intended look and performance. Some soiling or smudging of a component\u2019s finish is bound to happen. To ensure they are cleaned appropriately, manufacturer\u2019s instructions should be followed. Recommendations may include:<\/p>\n<ol>\n<li>A mild, non-abrasive cleaning agent is typically used for cleaning painted or reflective surfaces. Abrasive cleaning agents should not be employed<br \/>\nas they may scratch, mar, alter, discolor, and\/or remove the finish.<\/li>\n<li>Before cleaning the finish, a trial test should be performed on a section that will be hidden from view once installed. This ensures the cleaning agent selected is appropriate and will not damage the finish.<\/li>\n<li>Once an appropriate cleaning solution has been selected, care should be taken to only use the necessary amount. Ceiling components should not be soaked in the solution.<\/li>\n<li>A clean, soft sponge or cloth should apply the cleaning agent to ensure the applicator does not contain any abrasive elements that may damage the finish in question.<\/li>\n<li>Any excess cleaning solution should be removed immediately so it does not dry and leave a residue. In the event a large area needs to be cleaned, it is advisable to break the area down into smaller, more manageable sections so time is available to complete each cleaning cycle phase.<\/li>\n<li>After cleaning the soiled or smudged area, the surface should be wiped with a dry, soft cloth to remove any residual cleaning solution and dry the area. A damp cloth should be used to remove any residue left behind by a dry cloth.<\/li>\n<li>After the components are clean, a few minutes should be dedicated to air drying before installation. The clean components must be dry because other ceiling materials, such as ceiling board or insulation that come into contact with the cleaned components, can be susceptible to damage from moisture.<\/li>\n<\/ol>\n<p><b>Conclusion<\/b><br \/>\nSince each building and its environment are unique, special attention must be given to designing an<br \/>\nexterior soffit. Codes, budgets, and longevity all must\u00a0be taken into account, along with the design intent. With proper installation and maintenance, a metal ceiling soffit will perform as planned for many years\u2014protecting the building itself from water and pest damage, and also providing safety for occupants and owners.<\/p>\n<p><em>Edward Williams is a manager for Chicago Metallic Corporation\u2019s metal ceilings unit. He has more than 30 years of experience in manufacturing ceiling systems for commercial spaces, partnering with owners, designers, and installing contractors. Williams is an affiliate of the International Interior Design Association (IIDA). He can be contacted via e-mail at williamse@chicagometallic.com.<\/em><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Exterior soffits perform essential functions for ventilating, shading, and directing water away from a building. Regardless of geography or climate, exterior soffits are subjected to positive and negative wind loads. <\/p>\n","protected":false},"author":10,"featured_media":14512,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[520,6,179,449,187,267,188,280,189,283,499,461],"tags":[933,1195,1259,2415,2412,2413,1817,2414],"class_list":["post-14505","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-features","category-general","category-masterformat","category-uniformat","category-07-00-00-thermal-and-moisture-protection","category-07-40-00-roofing-and-siding-panels","category-08-00-00-openings","category-08-90-00-louvers-and-vents","category-09-00-00-finishes","category-09-50-00-ceilings","category-b3080overhead-exterior-enclosures","category-b30exterior-horizontal-enclosures","tag-aluminum","tag-division-07","tag-division-09","tag-edward-williams","tag-exterior-soffits","tag-metal-ceilings","tag-underwriters-laboratories","tag-wind-load-design","entry"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.8 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Designing metal ceilings for exterior soffits - The Construction Specifier<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.constructionspecifier.com\/designing-metal-ceilings-for-exterior-soffits\/\" \/>\n<link rel=\"next\" href=\"https:\/\/www.constructionspecifier.com\/designing-metal-ceilings-for-exterior-soffits\/2\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Designing metal ceilings for exterior soffits - The Construction Specifier\" \/>\n<meta property=\"og:description\" content=\"Exterior soffits perform essential functions for ventilating, shading, and directing water away from a building. Regardless of geography or climate, exterior soffits are subjected to positive and negative wind loads.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.constructionspecifier.com\/designing-metal-ceilings-for-exterior-soffits\/\" \/>\n<meta property=\"og:site_name\" content=\"The Construction Specifier\" \/>\n<meta property=\"article:published_time\" content=\"2013-01-06T19:25:11+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2017-01-20T19:22:07+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_MA_Fenway_Planostile.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"800\" \/>\n\t<meta property=\"og:image:height\" content=\"562\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Catherine Howlett\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Catherine Howlett\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"14 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/designing-metal-ceilings-for-exterior-soffits\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/designing-metal-ceilings-for-exterior-soffits\\\/\"},\"author\":{\"name\":\"Catherine Howlett\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/person\\\/26c86b4baf08f39a8684e1d14a8bc049\"},\"headline\":\"Designing metal ceilings for exterior soffits\",\"datePublished\":\"2013-01-06T19:25:11+00:00\",\"dateModified\":\"2017-01-20T19:22:07+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/designing-metal-ceilings-for-exterior-soffits\\\/\"},\"wordCount\":2709,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/designing-metal-ceilings-for-exterior-soffits\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2013\\\/01\\\/CMC_MA_Fenway_Planostile.jpg\",\"keywords\":[\"Aluminum\",\"Division 07\",\"Division 09\",\"Edward Williams\",\"Exterior soffits\",\"Metal ceilings\",\"Underwriters Laboratories\",\"Wind load design\"],\"articleSection\":[\"Features\",\"General\",\"MasterFormat\",\"UniFormat\",\"07 00 00 Thermal and Moisture Protection\",\"07 40 00 Roofing and Siding Panels\",\"08 00 00 Openings\",\"08 90 00 Louvers and Vents\",\"09 00 00 Finishes\",\"09 50 00 Ceilings\",\"B3080\u2212Overhead Exterior Enclosures\",\"B30\u2212Exterior Horizontal Enclosures\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.constructionspecifier.com\\\/designing-metal-ceilings-for-exterior-soffits\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/designing-metal-ceilings-for-exterior-soffits\\\/\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/designing-metal-ceilings-for-exterior-soffits\\\/\",\"name\":\"Designing metal ceilings for exterior soffits - The Construction Specifier\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/designing-metal-ceilings-for-exterior-soffits\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/designing-metal-ceilings-for-exterior-soffits\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2013\\\/01\\\/CMC_MA_Fenway_Planostile.jpg\",\"datePublished\":\"2013-01-06T19:25:11+00:00\",\"dateModified\":\"2017-01-20T19:22:07+00:00\",\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.constructionspecifier.com\\\/designing-metal-ceilings-for-exterior-soffits\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/designing-metal-ceilings-for-exterior-soffits\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2013\\\/01\\\/CMC_MA_Fenway_Planostile.jpg\",\"contentUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2013\\\/01\\\/CMC_MA_Fenway_Planostile.jpg\",\"width\":800,\"height\":562,\"caption\":\"Images courtesy Chicago Metallic Corporation\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#website\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/\",\"name\":\"The Construction Specifier\",\"description\":\"Solutions for the Construction Industry\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.constructionspecifier.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#organization\",\"name\":\"The Construction Specifier\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/CS_Logo_BW_LR.jpg\",\"contentUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/CS_Logo_BW_LR.jpg\",\"width\":288,\"height\":70,\"caption\":\"The Construction Specifier\"},\"image\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/person\\\/26c86b4baf08f39a8684e1d14a8bc049\",\"name\":\"Catherine Howlett\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/83438974c404fdb0228df73d0965bdf6df5e5a153bd0283c7d2375da180a1582?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/83438974c404fdb0228df73d0965bdf6df5e5a153bd0283c7d2375da180a1582?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/83438974c404fdb0228df73d0965bdf6df5e5a153bd0283c7d2375da180a1582?s=96&d=mm&r=g\",\"caption\":\"Catherine Howlett\"},\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/author\\\/catherine-howlett\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Designing metal ceilings for exterior soffits - The Construction Specifier","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.constructionspecifier.com\/designing-metal-ceilings-for-exterior-soffits\/","next":"https:\/\/www.constructionspecifier.com\/designing-metal-ceilings-for-exterior-soffits\/2\/","og_locale":"en_US","og_type":"article","og_title":"Designing metal ceilings for exterior soffits - The Construction Specifier","og_description":"Exterior soffits perform essential functions for ventilating, shading, and directing water away from a building. Regardless of geography or climate, exterior soffits are subjected to positive and negative wind loads.","og_url":"https:\/\/www.constructionspecifier.com\/designing-metal-ceilings-for-exterior-soffits\/","og_site_name":"The Construction Specifier","article_published_time":"2013-01-06T19:25:11+00:00","article_modified_time":"2017-01-20T19:22:07+00:00","og_image":[{"width":800,"height":562,"url":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_MA_Fenway_Planostile.jpg","type":"image\/jpeg"}],"author":"Catherine Howlett","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Catherine Howlett","Est. reading time":"14 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.constructionspecifier.com\/designing-metal-ceilings-for-exterior-soffits\/#article","isPartOf":{"@id":"https:\/\/www.constructionspecifier.com\/designing-metal-ceilings-for-exterior-soffits\/"},"author":{"name":"Catherine Howlett","@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/person\/26c86b4baf08f39a8684e1d14a8bc049"},"headline":"Designing metal ceilings for exterior soffits","datePublished":"2013-01-06T19:25:11+00:00","dateModified":"2017-01-20T19:22:07+00:00","mainEntityOfPage":{"@id":"https:\/\/www.constructionspecifier.com\/designing-metal-ceilings-for-exterior-soffits\/"},"wordCount":2709,"commentCount":0,"publisher":{"@id":"https:\/\/www.constructionspecifier.com\/#organization"},"image":{"@id":"https:\/\/www.constructionspecifier.com\/designing-metal-ceilings-for-exterior-soffits\/#primaryimage"},"thumbnailUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_MA_Fenway_Planostile.jpg","keywords":["Aluminum","Division 07","Division 09","Edward Williams","Exterior soffits","Metal ceilings","Underwriters Laboratories","Wind load design"],"articleSection":["Features","General","MasterFormat","UniFormat","07 00 00 Thermal and Moisture Protection","07 40 00 Roofing and Siding Panels","08 00 00 Openings","08 90 00 Louvers and Vents","09 00 00 Finishes","09 50 00 Ceilings","B3080\u2212Overhead Exterior Enclosures","B30\u2212Exterior Horizontal Enclosures"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.constructionspecifier.com\/designing-metal-ceilings-for-exterior-soffits\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.constructionspecifier.com\/designing-metal-ceilings-for-exterior-soffits\/","url":"https:\/\/www.constructionspecifier.com\/designing-metal-ceilings-for-exterior-soffits\/","name":"Designing metal ceilings for exterior soffits - The Construction Specifier","isPartOf":{"@id":"https:\/\/www.constructionspecifier.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.constructionspecifier.com\/designing-metal-ceilings-for-exterior-soffits\/#primaryimage"},"image":{"@id":"https:\/\/www.constructionspecifier.com\/designing-metal-ceilings-for-exterior-soffits\/#primaryimage"},"thumbnailUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_MA_Fenway_Planostile.jpg","datePublished":"2013-01-06T19:25:11+00:00","dateModified":"2017-01-20T19:22:07+00:00","inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.constructionspecifier.com\/designing-metal-ceilings-for-exterior-soffits\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.constructionspecifier.com\/designing-metal-ceilings-for-exterior-soffits\/#primaryimage","url":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_MA_Fenway_Planostile.jpg","contentUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2013\/01\/CMC_MA_Fenway_Planostile.jpg","width":800,"height":562,"caption":"Images courtesy Chicago Metallic Corporation"},{"@type":"WebSite","@id":"https:\/\/www.constructionspecifier.com\/#website","url":"https:\/\/www.constructionspecifier.com\/","name":"The Construction Specifier","description":"Solutions for the Construction Industry","publisher":{"@id":"https:\/\/www.constructionspecifier.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.constructionspecifier.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.constructionspecifier.com\/#organization","name":"The Construction Specifier","url":"https:\/\/www.constructionspecifier.com\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2017\/09\/CS_Logo_BW_LR.jpg","contentUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2017\/09\/CS_Logo_BW_LR.jpg","width":288,"height":70,"caption":"The Construction Specifier"},"image":{"@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/person\/26c86b4baf08f39a8684e1d14a8bc049","name":"Catherine Howlett","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/83438974c404fdb0228df73d0965bdf6df5e5a153bd0283c7d2375da180a1582?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/83438974c404fdb0228df73d0965bdf6df5e5a153bd0283c7d2375da180a1582?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/83438974c404fdb0228df73d0965bdf6df5e5a153bd0283c7d2375da180a1582?s=96&d=mm&r=g","caption":"Catherine Howlett"},"url":"https:\/\/www.constructionspecifier.com\/author\/catherine-howlett\/"}]}},"views":24995,"publishpress_future_workflow_manual_trigger":{"enabledWorkflows":[]},"_links":{"self":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts\/14505","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/users\/10"}],"replies":[{"embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/comments?post=14505"}],"version-history":[{"count":16,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts\/14505\/revisions"}],"predecessor-version":[{"id":25739,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts\/14505\/revisions\/25739"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/media\/14512"}],"wp:attachment":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/media?parent=14505"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/categories?post=14505"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/tags?post=14505"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}