{"id":16472,"date":"2016-05-03T11:52:13","date_gmt":"2016-05-03T15:52:13","guid":{"rendered":"http:\/\/www.constructionspecifier.com\/?p=16472"},"modified":"2016-05-03T11:52:13","modified_gmt":"2016-05-03T15:52:13","slug":"understanding-heat-air-and-moisture-control","status":"publish","type":"post","link":"https:\/\/www.constructionspecifier.com\/understanding-heat-air-and-moisture-control\/","title":{"rendered":"Understanding heat, air, and moisture control"},"content":{"rendered":"
\"Photo
Photo \u00a9 Bigstock.com<\/span><\/figcaption><\/figure>\n

by Sarah K. Flock, CDT, AIA and Carole Ceja, NCARB, RRC
\n<\/strong>Many designers and specifiers understand controlling air, vapor, and thermal transfer helps mitigate moisture problems within the building envelope. Moisture accumulation is a performance adversary that can lead to structural deterioration, finish damage, organic growth, and reduced building longevity (Figure 1). However, navigating fundamentals, code requirements, and industry trends related to these transfer mechanisms can be complex.<\/p>\n

The 2015 International Codes<\/em> (I-Codes<\/em>) were recently released; as of this writing, six states have adopted the 2015 International Energy Conservation Code<\/em> (IECC<\/em>) and International Building Code<\/em> (IBC<\/em>), with many more expected to join in the months to come. Even when designs meeting current codes are achieved, moisture issues can result. This article explores the impact of recent code changes, highlights various provisions\u2019 potential limitations, and presents examples of \u2018gaps\u2019 between codes and real-world performance as they relate to the topics of air, vapor, and thermal control.<\/p>\n

Thermal transfer
\n<\/strong>To incorporate the concept of thermal control in design, the fundamentals of heat transfer must be understood. Heat can transfer in various ways, such as conduction, convection, or radiation; it moves from areas of high to low temperatures independent of orientation.<\/p>\n

Conduction is the most familiar mode and is the flow of heat through solid materials, such as window frames or metal studs. The amount of heat transfer via conduction depends on the material\u2019s conductivity, mass, and configuration.<\/p>\n

Convection is the transfer of heat through a gas or liquid, such as air, and can occur either naturally or by force. Natural convection occurs in the wake of differing densities, exemplified in the old adage of hot air rising. Forced convection is based on similar principles, but may deal with increased rates of air movement generated by forces from outside (e.g.<\/em> wind) or inside (e.g. <\/em>HVAC systems).<\/p>\n

Thermal radiation is the movement of heat energy from a warm object to a cooler item through space. A common example involves an occupant standing in front of a window and experiencing cold during the winter. In this instance, one\u2019s body is radiating heat to the cooler window surface.<\/p>\n

The importance of limiting heat transfer is not only to promote energy efficiency and occupant comfort, but also to reduce the potential for condensation within building assemblies. When moist air comes into contact with nonporous surfaces below the dewpoint, water can condense and create frost or water droplets (Figure 2).<\/p>\n

Insulating materials are categorized by their resistance to heat flow, otherwise known as R-value. The higher the R-value, the greater the resistance to heat transfer. Another measure associated with heat transfer is the U-factor, typically associated with opaque assemblies or fenestration products. The smaller the U-factor, the better the product limits heat transfer.<\/p>\n

Air transfer
\n<\/strong>The new codes include major changes regarding air transfer\u2014not only because of a desire for increased energy efficiency, but also because air movement is often a large contributor to moisture migration.<\/p>\n

Air has a natural tendency to move from high to low pressure (Figure 3). Sources of pressure differentials at a building envelope are diverse. For example:<\/p>\n