{"id":205151,"date":"2023-06-23T10:00:11","date_gmt":"2023-06-23T14:00:11","guid":{"rendered":"https:\/\/www.constructionspecifier.com\/?p=205151"},"modified":"2023-06-09T10:21:36","modified_gmt":"2023-06-09T14:21:36","slug":"failures-what-if-the-coating-is-not-the-weakest-link","status":"publish","type":"post","link":"https:\/\/www.constructionspecifier.com\/failures-what-if-the-coating-is-not-the-weakest-link\/","title":{"rendered":"Failures: What if the coating is not the weakest link?"},"content":{"rendered":"
\"Concrete<\/a>
Concrete material was present on the reverse face of blistered and peeled coating.<\/span>Photos courtesy Wiss, Janney, Elstner Associates (WJE). <\/em><\/span><\/figcaption><\/figure>\n

Sometimes, the coating system may perform appropriately but be compromised by other materials in the architectural assembly.<\/p>\n

This industrial building in the Midwest was constructed in 1945. In 2006, it was adapted for reuse as apartments. As part of the renovation, the exposed structural concrete facade was coated with an acrylic elastomeric coating. As early as 2010, the coating was observed to be peeling from the facade.<\/p>\n

\"\"<\/a>
Example of coating adhesion test; the plane of failure is within the near-surface region of the concrete itself.<\/span><\/figcaption><\/figure>\n

Upon detailed investigation and testing, the coating layers were found to be well bonded to one another but the adhesion to the substrate was poor. At all test locations, as well as at locations of blistered and peeling coating, concrete material was present on the reverse face of the detached coating (Figures 1 and 2). Based on this observation during study of the coating, the project scope expanded to examine the concrete substrate.<\/p>\n

\"\"<\/a>
A thin section of the concrete in cross section, taken in plane polarized light, shows the weak band of paste along the top surface of the concrete, measuring 0.66 mm (0.026 in.) thick. Note, most of the weakened layer of concrete was lost during sample preparation, because of its soft and friable characteristics. The red arrow points to a remnant of the coating layer present along the exterior of the concrete.<\/span><\/figcaption><\/figure>\n

When examined petrographically, the concrete was found to have a very thin layer at the surface that had been leached of calcium and cement hydration products. At this thin layer, the cementitious hydration products that are responsible for giving concrete strength were no longer present, and the resulting layer of concrete was weak, porous, and friable. After measuring the thickness of the leached surface layer, it was found to be superficial, measuring approximately 0.635 mm (0.025 in.). Below the surface layer, the concrete was observed to be intact, with no leaching of calcium and hydration products. The weak surface layer is not a suitable substrate for the coating system. Removal of all areas of coating, followed by surface preparation to remove the weak concrete layer and recoating is now recommended.<\/p>\n

The exact cause of the leached surface layer is not certain. It may be the result of natural weathering from acidic rain in this urban location, during the six decades prior to the renovation when the concrete facade was uncoated. However, given the similar deterioration of concrete observed in both sheltered and highly exposed facade locations, a more likely explanation may be the use of strongly acidic cleaners, followed by inadequate rinsing and neutralization, prior to application of the coating. Regardless of the exact cause, this failure points to the importance of understanding the substrate condition prior to coating application. Once the condition is known, proper surface preparation techniques can be specified.<\/p>\n

Authors<\/strong><\/p>\n

\"\" Kenneth Itle, AIA, is an architect and associate principal with Wiss, Janney, Elstner Associates (WJE) in Northbrook, Illinois, specializing in historic preservation. He can be reached at kitle@wje.com.<\/p>\n

\"\"Daniela Mauro is a concrete petrographer and senior associate with Wiss, Janney, Elstner Associates (WJE) in Northbrook, Illinois, specializing in the investigation, evaluation, and characterization of construction materials. She can be reached at dmauro@wje.com.<\/p>\n

The opinions expressed in Failures are based on the authors\u2019 experiences and do not necessarily reflect that of The Construction Specifier<\/em> or CSI.<\/p>\n","protected":false},"excerpt":{"rendered":"

Regardless of the exact cause, this failure points to the importance of understanding the substrate condition prior to coating application.<\/p>\n","protected":false},"author":29853,"featured_media":205161,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[9,2,179,24],"tags":[3234,5613,7217,95,80,3637],"class_list":["post-205151","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-columns","category-matter-of-spec","category-masterformat","category-failures","tag-03-00-00-concrete","tag-cementitious-surface-coatings","tag-cladding-exterior-coatings","tag-facade","tag-failures-2","tag-renovation","entry"],"acf":[],"yoast_head":"\nFailures: What if the coating is not the weakest link? - The Construction Specifier<\/title>\n<meta name=\"description\" content=\"Regardless of the exact cause, this failure points to the importance of understanding the substrate condition prior to coating application.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.constructionspecifier.com\/failures-what-if-the-coating-is-not-the-weakest-link\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Failures: What if the coating is not the weakest link? - The Construction Specifier\" \/>\n<meta property=\"og:description\" content=\"Regardless of the exact cause, this failure points to the importance of understanding the substrate condition prior to coating application.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.constructionspecifier.com\/failures-what-if-the-coating-is-not-the-weakest-link\/\" \/>\n<meta property=\"og:site_name\" content=\"The Construction Specifier\" \/>\n<meta property=\"article:published_time\" content=\"2023-06-23T14:00:11+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2023\/06\/Figure-1_peel_F.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"400\" \/>\n\t<meta property=\"og:image:height\" content=\"200\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"arslan_ahmed\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"arslan_ahmed\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"4 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/failures-what-if-the-coating-is-not-the-weakest-link\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/failures-what-if-the-coating-is-not-the-weakest-link\\\/\"},\"author\":{\"name\":\"arslan_ahmed\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/person\\\/e325f337715d3e25ed442febefc5e502\"},\"headline\":\"Failures: What if the coating is not the weakest link?\",\"datePublished\":\"2023-06-23T14:00:11+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/failures-what-if-the-coating-is-not-the-weakest-link\\\/\"},\"wordCount\":603,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/failures-what-if-the-coating-is-not-the-weakest-link\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2023\\\/06\\\/Figure-1_peel_F.jpg\",\"keywords\":[\"03 00 00 Concrete\",\"Cementitious surface coatings\",\"Cladding exterior coatings\",\"facade\",\"failures\",\"Renovation\"],\"articleSection\":[\"Columns\",\"Matter of Spec\",\"MasterFormat\",\"Failures\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.constructionspecifier.com\\\/failures-what-if-the-coating-is-not-the-weakest-link\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/failures-what-if-the-coating-is-not-the-weakest-link\\\/\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/failures-what-if-the-coating-is-not-the-weakest-link\\\/\",\"name\":\"Failures: What if the coating is not the weakest link? - The Construction Specifier\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/failures-what-if-the-coating-is-not-the-weakest-link\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/failures-what-if-the-coating-is-not-the-weakest-link\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2023\\\/06\\\/Figure-1_peel_F.jpg\",\"datePublished\":\"2023-06-23T14:00:11+00:00\",\"description\":\"Regardless of the exact cause, this failure points to the importance of understanding the substrate condition prior to coating application.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/failures-what-if-the-coating-is-not-the-weakest-link\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.constructionspecifier.com\\\/failures-what-if-the-coating-is-not-the-weakest-link\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/failures-what-if-the-coating-is-not-the-weakest-link\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2023\\\/06\\\/Figure-1_peel_F.jpg\",\"contentUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2023\\\/06\\\/Figure-1_peel_F.jpg\",\"width\":400,\"height\":200},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/failures-what-if-the-coating-is-not-the-weakest-link\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.constructionspecifier.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Failures: What if the coating is not the weakest link?\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#website\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/\",\"name\":\"The Construction Specifier\",\"description\":\"Solutions for the Construction Industry\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.constructionspecifier.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#organization\",\"name\":\"The Construction Specifier\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/CS_Logo_BW_LR.jpg\",\"contentUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/CS_Logo_BW_LR.jpg\",\"width\":288,\"height\":70,\"caption\":\"The Construction Specifier\"},\"image\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/person\\\/e325f337715d3e25ed442febefc5e502\",\"name\":\"arslan_ahmed\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8b3bc632ccc425475dad30606aef08d446e7b620e3a88e6fe3a7f806083c070b?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8b3bc632ccc425475dad30606aef08d446e7b620e3a88e6fe3a7f806083c070b?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8b3bc632ccc425475dad30606aef08d446e7b620e3a88e6fe3a7f806083c070b?s=96&d=mm&r=g\",\"caption\":\"arslan_ahmed\"},\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/author\\\/arslan_ahmed\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Failures: What if the coating is not the weakest link? - The Construction Specifier","description":"Regardless of the exact cause, this failure points to the importance of understanding the substrate condition prior to coating application.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.constructionspecifier.com\/failures-what-if-the-coating-is-not-the-weakest-link\/","og_locale":"en_US","og_type":"article","og_title":"Failures: What if the coating is not the weakest link? - The Construction Specifier","og_description":"Regardless of the exact cause, this failure points to the importance of understanding the substrate condition prior to coating application.","og_url":"https:\/\/www.constructionspecifier.com\/failures-what-if-the-coating-is-not-the-weakest-link\/","og_site_name":"The Construction Specifier","article_published_time":"2023-06-23T14:00:11+00:00","og_image":[{"width":400,"height":200,"url":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2023\/06\/Figure-1_peel_F.jpg","type":"image\/jpeg"}],"author":"arslan_ahmed","twitter_card":"summary_large_image","twitter_misc":{"Written by":"arslan_ahmed","Est. reading time":"4 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.constructionspecifier.com\/failures-what-if-the-coating-is-not-the-weakest-link\/#article","isPartOf":{"@id":"https:\/\/www.constructionspecifier.com\/failures-what-if-the-coating-is-not-the-weakest-link\/"},"author":{"name":"arslan_ahmed","@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/person\/e325f337715d3e25ed442febefc5e502"},"headline":"Failures: What if the coating is not the weakest link?","datePublished":"2023-06-23T14:00:11+00:00","mainEntityOfPage":{"@id":"https:\/\/www.constructionspecifier.com\/failures-what-if-the-coating-is-not-the-weakest-link\/"},"wordCount":603,"commentCount":0,"publisher":{"@id":"https:\/\/www.constructionspecifier.com\/#organization"},"image":{"@id":"https:\/\/www.constructionspecifier.com\/failures-what-if-the-coating-is-not-the-weakest-link\/#primaryimage"},"thumbnailUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2023\/06\/Figure-1_peel_F.jpg","keywords":["03 00 00 Concrete","Cementitious surface coatings","Cladding exterior coatings","facade","failures","Renovation"],"articleSection":["Columns","Matter of Spec","MasterFormat","Failures"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.constructionspecifier.com\/failures-what-if-the-coating-is-not-the-weakest-link\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.constructionspecifier.com\/failures-what-if-the-coating-is-not-the-weakest-link\/","url":"https:\/\/www.constructionspecifier.com\/failures-what-if-the-coating-is-not-the-weakest-link\/","name":"Failures: What if the coating is not the weakest link? - The Construction Specifier","isPartOf":{"@id":"https:\/\/www.constructionspecifier.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.constructionspecifier.com\/failures-what-if-the-coating-is-not-the-weakest-link\/#primaryimage"},"image":{"@id":"https:\/\/www.constructionspecifier.com\/failures-what-if-the-coating-is-not-the-weakest-link\/#primaryimage"},"thumbnailUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2023\/06\/Figure-1_peel_F.jpg","datePublished":"2023-06-23T14:00:11+00:00","description":"Regardless of the exact cause, this failure points to the importance of understanding the substrate condition prior to coating application.","breadcrumb":{"@id":"https:\/\/www.constructionspecifier.com\/failures-what-if-the-coating-is-not-the-weakest-link\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.constructionspecifier.com\/failures-what-if-the-coating-is-not-the-weakest-link\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.constructionspecifier.com\/failures-what-if-the-coating-is-not-the-weakest-link\/#primaryimage","url":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2023\/06\/Figure-1_peel_F.jpg","contentUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2023\/06\/Figure-1_peel_F.jpg","width":400,"height":200},{"@type":"BreadcrumbList","@id":"https:\/\/www.constructionspecifier.com\/failures-what-if-the-coating-is-not-the-weakest-link\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.constructionspecifier.com\/"},{"@type":"ListItem","position":2,"name":"Failures: What if the coating is not the weakest link?"}]},{"@type":"WebSite","@id":"https:\/\/www.constructionspecifier.com\/#website","url":"https:\/\/www.constructionspecifier.com\/","name":"The Construction Specifier","description":"Solutions for the Construction Industry","publisher":{"@id":"https:\/\/www.constructionspecifier.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.constructionspecifier.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.constructionspecifier.com\/#organization","name":"The Construction Specifier","url":"https:\/\/www.constructionspecifier.com\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2017\/09\/CS_Logo_BW_LR.jpg","contentUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2017\/09\/CS_Logo_BW_LR.jpg","width":288,"height":70,"caption":"The Construction Specifier"},"image":{"@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/person\/e325f337715d3e25ed442febefc5e502","name":"arslan_ahmed","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/8b3bc632ccc425475dad30606aef08d446e7b620e3a88e6fe3a7f806083c070b?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/8b3bc632ccc425475dad30606aef08d446e7b620e3a88e6fe3a7f806083c070b?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/8b3bc632ccc425475dad30606aef08d446e7b620e3a88e6fe3a7f806083c070b?s=96&d=mm&r=g","caption":"arslan_ahmed"},"url":"https:\/\/www.constructionspecifier.com\/author\/arslan_ahmed\/"}]}},"views":15245,"publishpress_future_workflow_manual_trigger":{"enabledWorkflows":[]},"_links":{"self":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts\/205151","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/users\/29853"}],"replies":[{"embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/comments?post=205151"}],"version-history":[{"count":5,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts\/205151\/revisions"}],"predecessor-version":[{"id":205162,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts\/205151\/revisions\/205162"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/media\/205161"}],"wp:attachment":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/media?parent=205151"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/categories?post=205151"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/tags?post=205151"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}