{"id":71196,"date":"2018-09-24T10:50:33","date_gmt":"2018-09-24T14:50:33","guid":{"rendered":"https:\/\/www.constructionspecifier.com\/?p=71196"},"modified":"2018-09-24T13:50:12","modified_gmt":"2018-09-24T17:50:12","slug":"new-aci-committee-to-address-3d-printing","status":"publish","type":"post","link":"https:\/\/www.constructionspecifier.com\/new-aci-committee-to-address-3d-printing\/","title":{"rendered":"New ACI committee to address 3D printing"},"content":{"rendered":"
\"\"
Twin columns produced by a developer of large-scale 3D printing technology for the architecture, engineering, and construction sectors.
Photo courtesy XtreeE.<\/figcaption><\/figure>\n

The American Concrete Institute (ACI) has announced the formation of a new committee whose mission is to develop and report information on three-dimensional printing (3D) and additive manufacturing with inorganic cementitious materials.<\/p>\n

Chaired by Scott Jones, ACI Committee 564, 3D Printing with Cementitious Materials<\/a>, aims to develop publications relating to additive manufacturing with cement-based materials. Publications would focus on impact and challenges, and another on construction applications.<\/p>\n

The committee will meet at the upcoming Concrete Convention and Exposition<\/a> in Las Vegas, where there will be a series of seven presentations during a session titled Materials Science Aspects Related to Digital Manufacturing (3D Printing) of Cementitious Materials<\/a>, prior to the meeting.<\/p>\n

\u201c3D printing is a new and exciting frontier in the concrete industry,\u201d said Jones. \u201cACI Committee 564 hopes to bring together all stakeholders to discuss the many challenges and opportunities with this new technology.\u201d<\/p>\n

Further goals include collaborating with other ACI committees to disseminate additive manufacturing information and determining ways additive manufacturing may be integrated into the concrete community; collaborating with technical organizations to facilitate and coordinate information sharing; fostering discussion on research needs and challenges preventing additive manufacturing from wide adoption in the concrete construction community; and developing guidelines to evaluate materials and technology for additive manufacturing.<\/p>\n

The ACI will host a webinar through ACI University on advancing the art of 3D printing in concrete construction on Nov. 13.\u00a0 Details at ACIUniversity.com<\/a>.<\/p>\n","protected":false},"excerpt":{"rendered":"

The American Concrete Institute (ACI) has announced the formation of a new committee whose mission is to develop and report information on three-dimensional printing (3D) and additive manufacturing with inorganic cementitious materials.<\/p>\n","protected":false},"author":11326,"featured_media":71219,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[1029],"tags":[4922,4921,1452,4920,752],"class_list":["post-71196","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news","tag-3d-printing","tag-additive-manufacturing","tag-american-concrete-institute","tag-committee","tag-concrete","entry"],"acf":[],"yoast_head":"\nNew ACI committee to address 3D printing - The Construction Specifier<\/title>\n<meta name=\"description\" content=\"The ACI announced the formation of a committee who will report information on 3D printing and additive manufacturing with inorganic cementitious materials.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.constructionspecifier.com\/new-aci-committee-to-address-3d-printing\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"New ACI committee to address 3D printing - The Construction Specifier\" \/>\n<meta property=\"og:description\" content=\"The ACI announced the formation of a committee who will report information on 3D printing and additive manufacturing with inorganic cementitious materials.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.constructionspecifier.com\/new-aci-committee-to-address-3d-printing\/\" \/>\n<meta property=\"og:site_name\" content=\"The Construction Specifier\" \/>\n<meta property=\"article:published_time\" content=\"2018-09-24T14:50:33+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2018-09-24T17:50:12+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2018\/09\/Poteau-Alban-01_forweb.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1024\" \/>\n\t<meta property=\"og:image:height\" content=\"683\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Sarah Said\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Sarah Said\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"1 minute\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/new-aci-committee-to-address-3d-printing\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/new-aci-committee-to-address-3d-printing\\\/\"},\"author\":{\"name\":\"Sarah Said\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/person\\\/7d4e77e17457d3438733da3abaa626b1\"},\"headline\":\"New ACI committee to address 3D printing\",\"datePublished\":\"2018-09-24T14:50:33+00:00\",\"dateModified\":\"2018-09-24T17:50:12+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/new-aci-committee-to-address-3d-printing\\\/\"},\"wordCount\":266,\"commentCount\":1,\"publisher\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/new-aci-committee-to-address-3d-printing\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2018\\\/09\\\/Poteau-Alban-01_forweb.jpg\",\"keywords\":[\"3D printing\",\"additive manufacturing\",\"American Concrete Institute\",\"committee\",\"Concrete\"],\"articleSection\":[\"News\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.constructionspecifier.com\\\/new-aci-committee-to-address-3d-printing\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/new-aci-committee-to-address-3d-printing\\\/\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/new-aci-committee-to-address-3d-printing\\\/\",\"name\":\"New ACI committee to address 3D printing - The Construction Specifier\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/new-aci-committee-to-address-3d-printing\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/new-aci-committee-to-address-3d-printing\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2018\\\/09\\\/Poteau-Alban-01_forweb.jpg\",\"datePublished\":\"2018-09-24T14:50:33+00:00\",\"dateModified\":\"2018-09-24T17:50:12+00:00\",\"description\":\"The ACI announced the formation of a committee who will report information on 3D printing and additive manufacturing with inorganic cementitious materials.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/new-aci-committee-to-address-3d-printing\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.constructionspecifier.com\\\/new-aci-committee-to-address-3d-printing\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/new-aci-committee-to-address-3d-printing\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2018\\\/09\\\/Poteau-Alban-01_forweb.jpg\",\"contentUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2018\\\/09\\\/Poteau-Alban-01_forweb.jpg\",\"width\":1024,\"height\":683,\"caption\":\"Twin columns produced by a developer of large-scale 3D printing technology for the architectural design, engineering and construction sector. Photo courtesy XtreeE.\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/new-aci-committee-to-address-3d-printing\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.constructionspecifier.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"New ACI committee to address 3D printing\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#website\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/\",\"name\":\"The Construction Specifier\",\"description\":\"Solutions for the Construction Industry\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.constructionspecifier.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#organization\",\"name\":\"The Construction Specifier\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/CS_Logo_BW_LR.jpg\",\"contentUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/CS_Logo_BW_LR.jpg\",\"width\":288,\"height\":70,\"caption\":\"The Construction Specifier\"},\"image\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/person\\\/7d4e77e17457d3438733da3abaa626b1\",\"name\":\"Sarah Said\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/bce889938ec6d0d352bc138d6700d01fcfb8f966f41920aabfb49353c5be9a03?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/bce889938ec6d0d352bc138d6700d01fcfb8f966f41920aabfb49353c5be9a03?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/bce889938ec6d0d352bc138d6700d01fcfb8f966f41920aabfb49353c5be9a03?s=96&d=mm&r=g\",\"caption\":\"Sarah Said\"},\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/author\\\/sarah_said\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"New ACI committee to address 3D printing - The Construction Specifier","description":"The ACI announced the formation of a committee who will report information on 3D printing and additive manufacturing with inorganic cementitious materials.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.constructionspecifier.com\/new-aci-committee-to-address-3d-printing\/","og_locale":"en_US","og_type":"article","og_title":"New ACI committee to address 3D printing - The Construction Specifier","og_description":"The ACI announced the formation of a committee who will report information on 3D printing and additive manufacturing with inorganic cementitious materials.","og_url":"https:\/\/www.constructionspecifier.com\/new-aci-committee-to-address-3d-printing\/","og_site_name":"The Construction Specifier","article_published_time":"2018-09-24T14:50:33+00:00","article_modified_time":"2018-09-24T17:50:12+00:00","og_image":[{"width":1024,"height":683,"url":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2018\/09\/Poteau-Alban-01_forweb.jpg","type":"image\/jpeg"}],"author":"Sarah Said","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Sarah Said","Est. reading time":"1 minute"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.constructionspecifier.com\/new-aci-committee-to-address-3d-printing\/#article","isPartOf":{"@id":"https:\/\/www.constructionspecifier.com\/new-aci-committee-to-address-3d-printing\/"},"author":{"name":"Sarah Said","@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/person\/7d4e77e17457d3438733da3abaa626b1"},"headline":"New ACI committee to address 3D printing","datePublished":"2018-09-24T14:50:33+00:00","dateModified":"2018-09-24T17:50:12+00:00","mainEntityOfPage":{"@id":"https:\/\/www.constructionspecifier.com\/new-aci-committee-to-address-3d-printing\/"},"wordCount":266,"commentCount":1,"publisher":{"@id":"https:\/\/www.constructionspecifier.com\/#organization"},"image":{"@id":"https:\/\/www.constructionspecifier.com\/new-aci-committee-to-address-3d-printing\/#primaryimage"},"thumbnailUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2018\/09\/Poteau-Alban-01_forweb.jpg","keywords":["3D printing","additive manufacturing","American Concrete Institute","committee","Concrete"],"articleSection":["News"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.constructionspecifier.com\/new-aci-committee-to-address-3d-printing\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.constructionspecifier.com\/new-aci-committee-to-address-3d-printing\/","url":"https:\/\/www.constructionspecifier.com\/new-aci-committee-to-address-3d-printing\/","name":"New ACI committee to address 3D printing - The Construction Specifier","isPartOf":{"@id":"https:\/\/www.constructionspecifier.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.constructionspecifier.com\/new-aci-committee-to-address-3d-printing\/#primaryimage"},"image":{"@id":"https:\/\/www.constructionspecifier.com\/new-aci-committee-to-address-3d-printing\/#primaryimage"},"thumbnailUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2018\/09\/Poteau-Alban-01_forweb.jpg","datePublished":"2018-09-24T14:50:33+00:00","dateModified":"2018-09-24T17:50:12+00:00","description":"The ACI announced the formation of a committee who will report information on 3D printing and additive manufacturing with inorganic cementitious materials.","breadcrumb":{"@id":"https:\/\/www.constructionspecifier.com\/new-aci-committee-to-address-3d-printing\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.constructionspecifier.com\/new-aci-committee-to-address-3d-printing\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.constructionspecifier.com\/new-aci-committee-to-address-3d-printing\/#primaryimage","url":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2018\/09\/Poteau-Alban-01_forweb.jpg","contentUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2018\/09\/Poteau-Alban-01_forweb.jpg","width":1024,"height":683,"caption":"Twin columns produced by a developer of large-scale 3D printing technology for the architectural design, engineering and construction sector. Photo courtesy XtreeE."},{"@type":"BreadcrumbList","@id":"https:\/\/www.constructionspecifier.com\/new-aci-committee-to-address-3d-printing\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.constructionspecifier.com\/"},{"@type":"ListItem","position":2,"name":"New ACI committee to address 3D printing"}]},{"@type":"WebSite","@id":"https:\/\/www.constructionspecifier.com\/#website","url":"https:\/\/www.constructionspecifier.com\/","name":"The Construction Specifier","description":"Solutions for the Construction Industry","publisher":{"@id":"https:\/\/www.constructionspecifier.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.constructionspecifier.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.constructionspecifier.com\/#organization","name":"The Construction Specifier","url":"https:\/\/www.constructionspecifier.com\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2017\/09\/CS_Logo_BW_LR.jpg","contentUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2017\/09\/CS_Logo_BW_LR.jpg","width":288,"height":70,"caption":"The Construction Specifier"},"image":{"@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/person\/7d4e77e17457d3438733da3abaa626b1","name":"Sarah Said","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/bce889938ec6d0d352bc138d6700d01fcfb8f966f41920aabfb49353c5be9a03?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/bce889938ec6d0d352bc138d6700d01fcfb8f966f41920aabfb49353c5be9a03?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/bce889938ec6d0d352bc138d6700d01fcfb8f966f41920aabfb49353c5be9a03?s=96&d=mm&r=g","caption":"Sarah Said"},"url":"https:\/\/www.constructionspecifier.com\/author\/sarah_said\/"}]}},"views":12095,"publishpress_future_workflow_manual_trigger":{"enabledWorkflows":[]},"_links":{"self":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts\/71196","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/users\/11326"}],"replies":[{"embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/comments?post=71196"}],"version-history":[{"count":5,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts\/71196\/revisions"}],"predecessor-version":[{"id":71221,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts\/71196\/revisions\/71221"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/media\/71219"}],"wp:attachment":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/media?parent=71196"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/categories?post=71196"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/tags?post=71196"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}