{"id":88394,"date":"2019-06-05T00:00:05","date_gmt":"2019-06-05T04:00:05","guid":{"rendered":"https:\/\/www.constructionspecifier.com\/?p=88394"},"modified":"2019-05-16T11:47:21","modified_gmt":"2019-05-16T15:47:21","slug":"ptac-units-all-about-the-details","status":"publish","type":"post","link":"https:\/\/www.constructionspecifier.com\/ptac-units-all-about-the-details\/","title":{"rendered":"PTAC units: All about the details"},"content":{"rendered":"

\"\"<\/a> \"\"<\/a>FAILURES<\/span><\/strong><\/span>
\nCraig A. Hargrove, AIA, LEED AP, and Tai Mahmuti, PE,
\n<\/strong><\/p>\n

To provide personalized temperature control, while maintaining low initial costs and simplified installation, hotels and dormitories often use packaged terminal air conditioning (PTAC) units. However, penetration of fa\u00e7ade systems with PTAC units compromised by poor detail design and\/or improper installation has led to water infiltration and moisture-related problems.<\/p>\n

\"The<\/a>
The packaged terminal air conditioning (PTAC) louver, on the exterior face of the wall sleeve, integrated part of the window-wall system. The weep holes were over-drilled at the louver frame, creating an opening between the louver and the window frames.
Photos courtesy Hoffmann Architects<\/em><\/span><\/figcaption><\/figure>\n

PTAC units are factory assembled, provide heating and cooling to a room or area, and do not require connection to the building\u2019s central heating and cooling system. The units are usually installed through the exterior wall or fenestration framing with a sleeve mounted in the opening (typically made of metal) and a louver on the exterior face. The louver allows for air intake and exhaust, while shedding moisture away from the interior of the sleeve. However, louvers are often not designed to stop wind-driven rain and can admit water inside the sleeve requiring drainage, either through weep holes or internal drains.<\/p>\n

PTAC manufacturers typically do not provide waterproofing details to incorporate their units and wall sleeves into a specific building enclosure system. Likewise, construction drawings often have an insufficient level of detail to ensure a weathertight connection between the PTAC unit and the wall assembly. Exclusion of fundamental waterproofing details and\/or poor installation can contribute to water leakage at PTAC units.<\/p>\n

\"View<\/a>
View of undersized louver from the interior, after removal of the wall sleeve and glazing pocket snap covers. Water ponding can be observed in the glazing pocket.<\/span><\/figcaption><\/figure>\n

In the illustrated example, the window-wall system was modified by the manufacturer during design and fabrication to include an oversized louver with weep holes set flush with the windows above, to match PTAC ventilation to the fa\u00e7ade profile. After the panelized window-wall system was installed on the fa\u00e7ade, a different trade constructed an undersized wall sleeve abutting the louver, with butyl tape sealing the perimeter. Shortly after completion of construction, water leaks appeared on the inside of the building, and an investigation by a third-party determined the weep holes of the wall sleeve did not align with the weep holes of the louver. Further, the PTAC sleeves were installed back-pitched, so the water in the sleeve could not drain to the exterior, resulting in interior leaks.<\/p>\n

As a repair, additional weep holes were drilled through the louver frame, and a liquid-applied waterproofing membrane was installed to positively slope and drain the sleeves. The new weep holes, however, were over-drilled, creating an opening between the window and louver frames and forming a path for water to infiltrate the glazing pocket. Eventually, the window-wall glazing pocket overflowed, resulting in additional water to the building interior.<\/p>\n

To minimize the potential for water infiltration at PTAC units, coordination among the design team, manufacturers, and the trades involved is necessary. Construction documents must include proper waterproofing details at wall penetrations, as well as water management systems. Other items to consider may be thermal bridging, bird protection, and snow buildup.<\/p>\n

The opinions expressed in Failures are based on the authors\u2019 experiences and do not necessarily reflect those of The Construction Specifier<\/em> or CSI.<\/span><\/p>\n

Craig A. Hargrove, AIA, LEED AP, is senior vice-president with Hoffmann Architects, Inc., and manager of the firm\u2019s New York City office. He may be reached at c.hargrove@hoffarch.com<\/a>.<\/span><\/em><\/p>\n

Tai Mahmuti, PE, is project engineer with Hoffmann Architects in New York, specializing in structural design and detailing of the building enclosure. He may be reached via e-mail <\/span>at t.mahmuti@hoffarch.com<\/a>.<\/span><\/em><\/p>\n

\u00a0<\/strong><\/p>\n","protected":false},"excerpt":{"rendered":"

To provide personalized temperature control, while maintaining low initial costs and simplified installation, hotels and dormitories often use packaged terminal air conditioning (PTAC) units. However, penetration of fa\u00e7ade systems with PTAC units compromised by poor detail design and\/or improper installation has led to water infiltration and moisture-related problems.<\/p>\n","protected":false},"author":4183,"featured_media":88396,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[9,24],"tags":[1039,103,5353,647,913],"class_list":["post-88394","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-columns","category-failures","tag-fenestration","tag-hvac","tag-ptac-units","tag-waterproofing","tag-window","entry"],"acf":[],"yoast_head":"\nPTAC units: All about the details - The Construction Specifier<\/title>\n<meta name=\"description\" content=\"The effects of cold on buildings are widely varied. A more extreme example is cracking and spalling of masonry when water is trapped within the pores.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.constructionspecifier.com\/ptac-units-all-about-the-details\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"PTAC units: All about the details - The Construction Specifier\" \/>\n<meta property=\"og:description\" content=\"The effects of cold on buildings are widely varied. A more extreme example is cracking and spalling of masonry when water is trapped within the pores.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.constructionspecifier.com\/ptac-units-all-about-the-details\/\" \/>\n<meta property=\"og:site_name\" content=\"The Construction Specifier\" \/>\n<meta property=\"article:published_time\" content=\"2019-06-05T04:00:05+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2019\/05\/20190128_092330.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"800\" \/>\n\t<meta property=\"og:image:height\" content=\"444\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"nithya_caleb\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"nithya_caleb\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"3 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/ptac-units-all-about-the-details\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/ptac-units-all-about-the-details\\\/\"},\"author\":{\"name\":\"nithya_caleb\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/person\\\/b98ef8acdc4f61ec3c542bdb863ee469\"},\"headline\":\"PTAC units: All about the details\",\"datePublished\":\"2019-06-05T04:00:05+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/ptac-units-all-about-the-details\\\/\"},\"wordCount\":649,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/ptac-units-all-about-the-details\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2019\\\/05\\\/20190128_092330.jpg\",\"keywords\":[\"fenestration\",\"HVAC\",\"PTAC units\",\"Waterproofing\",\"Window\"],\"articleSection\":[\"Columns\",\"Failures\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.constructionspecifier.com\\\/ptac-units-all-about-the-details\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/ptac-units-all-about-the-details\\\/\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/ptac-units-all-about-the-details\\\/\",\"name\":\"PTAC units: All about the details - The Construction Specifier\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/ptac-units-all-about-the-details\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/ptac-units-all-about-the-details\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2019\\\/05\\\/20190128_092330.jpg\",\"datePublished\":\"2019-06-05T04:00:05+00:00\",\"description\":\"The effects of cold on buildings are widely varied. A more extreme example is cracking and spalling of masonry when water is trapped within the pores.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/ptac-units-all-about-the-details\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.constructionspecifier.com\\\/ptac-units-all-about-the-details\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/ptac-units-all-about-the-details\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2019\\\/05\\\/20190128_092330.jpg\",\"contentUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2019\\\/05\\\/20190128_092330.jpg\",\"width\":800,\"height\":444,\"caption\":\"The packaged terminal air conditioning (PTAC) louver, on the exterior face of the wall sleeve, integrated part of the window-wall system. The weep holes were over-drilled at the louver frame, creating an opening between the louver and the window frames. Photos courtesy Hoffmann Architects\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/ptac-units-all-about-the-details\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.constructionspecifier.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"PTAC units: All about the details\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#website\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/\",\"name\":\"The Construction Specifier\",\"description\":\"Solutions for the Construction Industry\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.constructionspecifier.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#organization\",\"name\":\"The Construction Specifier\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/CS_Logo_BW_LR.jpg\",\"contentUrl\":\"https:\\\/\\\/www.constructionspecifier.com\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/CS_Logo_BW_LR.jpg\",\"width\":288,\"height\":70,\"caption\":\"The Construction Specifier\"},\"image\":{\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.constructionspecifier.com\\\/#\\\/schema\\\/person\\\/b98ef8acdc4f61ec3c542bdb863ee469\",\"name\":\"nithya_caleb\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8a720f16106e3badd15369daa30776863e73616618206dbee6511c6f2a993456?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8a720f16106e3badd15369daa30776863e73616618206dbee6511c6f2a993456?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8a720f16106e3badd15369daa30776863e73616618206dbee6511c6f2a993456?s=96&d=mm&r=g\",\"caption\":\"nithya_caleb\"},\"url\":\"https:\\\/\\\/www.constructionspecifier.com\\\/author\\\/nithya_caleb\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"PTAC units: All about the details - The Construction Specifier","description":"The effects of cold on buildings are widely varied. A more extreme example is cracking and spalling of masonry when water is trapped within the pores.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.constructionspecifier.com\/ptac-units-all-about-the-details\/","og_locale":"en_US","og_type":"article","og_title":"PTAC units: All about the details - The Construction Specifier","og_description":"The effects of cold on buildings are widely varied. A more extreme example is cracking and spalling of masonry when water is trapped within the pores.","og_url":"https:\/\/www.constructionspecifier.com\/ptac-units-all-about-the-details\/","og_site_name":"The Construction Specifier","article_published_time":"2019-06-05T04:00:05+00:00","og_image":[{"width":800,"height":444,"url":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2019\/05\/20190128_092330.jpg","type":"image\/jpeg"}],"author":"nithya_caleb","twitter_card":"summary_large_image","twitter_misc":{"Written by":"nithya_caleb","Est. reading time":"3 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.constructionspecifier.com\/ptac-units-all-about-the-details\/#article","isPartOf":{"@id":"https:\/\/www.constructionspecifier.com\/ptac-units-all-about-the-details\/"},"author":{"name":"nithya_caleb","@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/person\/b98ef8acdc4f61ec3c542bdb863ee469"},"headline":"PTAC units: All about the details","datePublished":"2019-06-05T04:00:05+00:00","mainEntityOfPage":{"@id":"https:\/\/www.constructionspecifier.com\/ptac-units-all-about-the-details\/"},"wordCount":649,"commentCount":0,"publisher":{"@id":"https:\/\/www.constructionspecifier.com\/#organization"},"image":{"@id":"https:\/\/www.constructionspecifier.com\/ptac-units-all-about-the-details\/#primaryimage"},"thumbnailUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2019\/05\/20190128_092330.jpg","keywords":["fenestration","HVAC","PTAC units","Waterproofing","Window"],"articleSection":["Columns","Failures"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.constructionspecifier.com\/ptac-units-all-about-the-details\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.constructionspecifier.com\/ptac-units-all-about-the-details\/","url":"https:\/\/www.constructionspecifier.com\/ptac-units-all-about-the-details\/","name":"PTAC units: All about the details - The Construction Specifier","isPartOf":{"@id":"https:\/\/www.constructionspecifier.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.constructionspecifier.com\/ptac-units-all-about-the-details\/#primaryimage"},"image":{"@id":"https:\/\/www.constructionspecifier.com\/ptac-units-all-about-the-details\/#primaryimage"},"thumbnailUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2019\/05\/20190128_092330.jpg","datePublished":"2019-06-05T04:00:05+00:00","description":"The effects of cold on buildings are widely varied. A more extreme example is cracking and spalling of masonry when water is trapped within the pores.","breadcrumb":{"@id":"https:\/\/www.constructionspecifier.com\/ptac-units-all-about-the-details\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.constructionspecifier.com\/ptac-units-all-about-the-details\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.constructionspecifier.com\/ptac-units-all-about-the-details\/#primaryimage","url":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2019\/05\/20190128_092330.jpg","contentUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2019\/05\/20190128_092330.jpg","width":800,"height":444,"caption":"The packaged terminal air conditioning (PTAC) louver, on the exterior face of the wall sleeve, integrated part of the window-wall system. The weep holes were over-drilled at the louver frame, creating an opening between the louver and the window frames. Photos courtesy Hoffmann Architects"},{"@type":"BreadcrumbList","@id":"https:\/\/www.constructionspecifier.com\/ptac-units-all-about-the-details\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.constructionspecifier.com\/"},{"@type":"ListItem","position":2,"name":"PTAC units: All about the details"}]},{"@type":"WebSite","@id":"https:\/\/www.constructionspecifier.com\/#website","url":"https:\/\/www.constructionspecifier.com\/","name":"The Construction Specifier","description":"Solutions for the Construction Industry","publisher":{"@id":"https:\/\/www.constructionspecifier.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.constructionspecifier.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.constructionspecifier.com\/#organization","name":"The Construction Specifier","url":"https:\/\/www.constructionspecifier.com\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2017\/09\/CS_Logo_BW_LR.jpg","contentUrl":"https:\/\/www.constructionspecifier.com\/wp-content\/uploads\/2017\/09\/CS_Logo_BW_LR.jpg","width":288,"height":70,"caption":"The Construction Specifier"},"image":{"@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.constructionspecifier.com\/#\/schema\/person\/b98ef8acdc4f61ec3c542bdb863ee469","name":"nithya_caleb","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/8a720f16106e3badd15369daa30776863e73616618206dbee6511c6f2a993456?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/8a720f16106e3badd15369daa30776863e73616618206dbee6511c6f2a993456?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/8a720f16106e3badd15369daa30776863e73616618206dbee6511c6f2a993456?s=96&d=mm&r=g","caption":"nithya_caleb"},"url":"https:\/\/www.constructionspecifier.com\/author\/nithya_caleb\/"}]}},"views":15895,"publishpress_future_workflow_manual_trigger":{"enabledWorkflows":[]},"_links":{"self":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts\/88394","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/users\/4183"}],"replies":[{"embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/comments?post=88394"}],"version-history":[{"count":1,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts\/88394\/revisions"}],"predecessor-version":[{"id":88398,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/posts\/88394\/revisions\/88398"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/media\/88396"}],"wp:attachment":[{"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/media?parent=88394"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/categories?post=88394"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.constructionspecifier.com\/wp-json-v2\/wp\/v2\/tags?post=88394"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}