In the October issue of The Construction Specifier, authors Ward R. Malisch, PhD, PE, and Bruce A. Suprenant, PhD, PE (both of the American Society of Concrete Contractors [ASCC]) wrote our cover story, “Bridging the Specification Gap between Divisions 03 and 09: Concrete and Floorcovering Associations Unite.” The piece looked at how their association teamed up with six other flooring groups to find a solution to a ‘specification gap’ between Divisions 03 and 09 in terms of floor surface flatness requirements.
For space reasons, we had to hold off including a little more background on how these associations collaborated. That ‘missing’ information follows, in the words of Malisch and Suprenant:
The impetus for developing the American Society of Concrete Contractors (ASCC) Position Statements came from a group of contractor members who became aware of a paper published by a national wood flooring organization—not, it should be noted, the National Wood Flooring Association (NWFA)—that stated the organization did not believe in F-numbers and felt they should not be used to measure slabs for gym floors. Rather than trying to decide how they could build a floor that meets unreasonable requirements, ASCC contractors realized they needed to spend their time and resources to educate the industry on the limitations of concrete floors. Thus was born this series, including ASCC Position Statement 6, Division 3 versus Division 9 Floor Flatness Tolerances.
Then, rather than continuing to fight their fellow contractors in the floorcovering industry, ASCC made an effort to get them on board, realizing the greater strength of a united front. ASCC first approached NWFA. With only minor rewriting, that association was eager to endorse the Position Statement.
“For the first time, instead of disagreeing, the two sides have come together to find a common solution to a problem that has cost both groups hundreds of thousands of dollars in rework,” said NWFA president/CEO Michael Martin.
Shortly thereafter, ASCC invited the National Tile Contractors Association (NTCA) to participate in a panel discussion on this topic featuring contractors and technical personnel from both disciplines. Both sides acknowledged the wisdom of a bid allowance to compensate for the incompatibility of the measuring methods, and NTCA became the second flooring association to sign on.
Bart Bettiga, NTCA executive director, commented on the reasons for the document’s usefulness.
“It is our belief this position statement is one of the most important documents we have supported in the past several years,” he said. “This statement accomplishes its goals on many levels. It educates the construction professional about important considerations that must be taken when specifying floorcovering products over concrete substrates.”
“The most important point emphasized in this position statement centers on the disparity related to meeting industry standards in the respective divisions,” Bettiga continued. “Equally important is the call for communication between the related parties and for a proactive approach to be determined prior to the commencement of the work. We strongly support the use of this statement to our members in their communication to the general contractor and architect/specifier on their projects.”
These two organizations were followed by the Flooring Contractors Association. Then, last year, Scott Conwell, director of industry development and technical services for the International Masonry Institute (IMI) contacted the ASCC, asking to add the group’s name, along with those of the Tile Contractors Association of America (TCAA) and the International Union Of Bricklayers and Allied Craftsmen (BAC) to the list of supporters.
“This ASCC Position Statement succinctly brings to light the disparity in requirements for floor flatness between the concrete and the ceramic tile trades,” says Conwell. “The paper effectively brings expectations in line, leading to increased cooperation on the job site to make any corrections to the floor that may be necessary prior to installation of the tile finish.”
Two trades with distinctively different practices and obstacles to overcome but with one goal: to deliver a high-quality product to a satisfied owner.