SilveRboard® Graphite XS is an expanded polystyrene (EPS) base material that incorporates a carbon graphite coating which increases the thermal performance of the EPS insulation. The graphite EPS beads reflect radiant heat energy similar to the effect of a mirror and reduce thermal conductivity…

Thermal bridging through steel and concrete framing can have a significant impact on a building’s energy performance. Reducing heat flow within a building’s thermal envelope reduces energy consumption as well as potential condensation issues.

Armadillo Structural Connections…

Thermal bridging through steel and concrete framing can have a significant impact on a building’s energy performance. Reducing heat flow within a building’s thermal envelope reduces energy consumption and potential condensation issues.

Armadillo Structural Connections group…

Prevent thermal bridging at façade, cladding and wall panel connections using Armatherm™ Z GIRTs. Improve the effective U-value of wall assemblies by as much as 80% and decrease heat loss by completely eliminating traditional metal-to-metal connection points that penetrate the…

DELTA®-FASSADE S is ultra-violet (UV) resistant, highly permeable,  and water-tight. It is a high performance solution for demanding open joint cladding systems.

• Black color improves appearance of open joint cladding.

• Designed for…

DELTA®-VENT SA is a high performance solution for energy-efficient wall systems. Fully adhered membranes are less prone to air and moisture leaks that are common with other types of barriers.

• Aggressively self-adhesive.
  
• Unique front side adhesive edge…

rfoil reflective insulation is a single or double layer of polyethylene bubbles bonded to, and sandwiched between, two radiant barrier metallized sheets. Its unique construction is specially designed to reduce radiant heat gain or loss in residential, commercial, and HVAC applications.

An insulated metal panel (IMP) is a lightweight modular product that forms the entire building envelope assembly—from thermal insulation and vapour barrier to weatherproofing, fire resistance, and finish. These wall or roof panels consist of metal facings bonded to a structural…

VANDEX SUPER and VANDEX SUPER WHITE are waterproof treatments that become an integral part of concrete through a crystallization process. Once the cementitious carrier is applied to either the positive or negative side of the substrate, crystal growth occurs, blocking the…

Closed-cell sprayed polyurethane foam (ccSPF) insulation, made with Honeywell’s Solstice® Liquid Blowing Agent (LBA), is a certified air barrier* and vapour retarder that increases building strength and durability. Currently, hydrofluorocarbon (HFC)-based blowing agents are used in…

Titanium® UDL30 is a highly engineered, mechanically attached, coated, woven-synthetic underlayment for sloped roofs. UDL30’s advanced polymers allow it to be used under all types of primary roofing materials to replace #30 felt. Its grey technology provides for a cooler working surface…

The LiveRoof Standard vegetated roof system is an extensive and semi-intensive, modular, pre-vegetated assembly. At 108 mm (4.25 in.) in depth, it is ideal for most applications and offers a blend of esthetics, stormwater management, and cost.

Soil: Approximately 108…

Each Moderne Slate shingles consists of more than 85 per cent recycled industrial-grade plastic and comes with a transferrable lifetime warranty. The tiles are dent-resistant, ultraviolet (UV)-protected, and mould-resistant; they also exhibit no freeze-thaw degradation.

Moderne…

Superior water retention-weight ratio.

XF301 Sedum Systems are extensive green roof systems engineered to perform. A perfect pre-grown solution for retrofits and new builds. The XF301 Sedum Standard system is loose-laid and uses a low-maintenance pre-vegetated sedum mat. It…

Popular for use in exterior metal panels, building enclosures, and other applications (e.g. column covers, beam enclosures, elevator panels, and fascia), aluminum is very ductile and pliable for creating forms. Its light weight does not compromise strength, as some alloys are known…

These are generally used in curtain wall systems, either behind a metal panel or on the back of spandrel glass. They provide excellent insulation, fire safety, and sound absorption capabilities.

Yarl Metal produces backpans of various shapes and sizes, the most common are…

The Vantage Collection is a contemporary, sleek, and smooth-operating trim option for pocket doors featuring a vertical thumb turn.  Contemporary, space-saving pocket doors come alive with sleek and easy-to-operate hardware. The Vantage Collection is versatile and ideal for narrow door…

SilentPac™ by Accurate is a suite of acoustically engineered door hardware designed to soften noise from opening and closing doors, ultimately resulting in more peaceful and quiet environments.

SilentPac™ offers:

? noise reduction of up to 16x;

? simple…

Commercial toughness meets sleek design with the G87 Glass Patch Hardware Series. Compatible with various door designs and configurations, the G87 Series is available for swinging doors, sliding doors, and offset swinging doors, as well as custom options for maximum…

Dow Corning® HPI-1000 Building Insulation Blanket can help overcome the toughest thermal bridging challenges. With the blanket’s superior insulating performance, one can create sustainable buildings without compromising design aesthetics. It also allows the retrofitting of existing designs…

The Dow Corning® Silicone Air Barrier System is the only water-based 100% silicone air barrier complemented by a fully compatible system. Providing airtight performance that exceeds industry standards, the system accommodates building movement and eliminates system failures due to…

Dow Corning® 121 Structural Glazing Sealant answers the challenges façade contractors and manufacturers face with the slow cure of one-part sealants, mixing of multi-part sealants, and limited movement capability of tapes. It is ideal for assembly, installation, or repair of structurally…

Flannery’s Wood Panel J-Mold is a termination trim for millwork panels that terminate against a dissimilar wall or material. The Wood Panel J-Mold comes with a 3/8” face flange, which allows the installer to slide the wood paneling in behind the flange and cover the unfinished…

Flannery’s Cement Panel Screed creates a vertical reveal between two Fiber Cement Panels. The Cement Panel Screed is an attractive alternative to butting one cement panel to another. Flannery has over 14 different styles trim available for fiber cement panels which can be made to suit…

Moisture and ventilation are essential to proper construction. Keene Building Products has pioneered the use of entangled net products, Driwall™ Rainscreen, in walls, roofs, and foundations to handle incidental moisture and create drying potential.

The full-wall Driwall™…

Quiet Qurl® 55/025 MC is a noise-control insulation mat designed to limit impact noise between floors. This resilient mat absorbs noise when sandwiched in a mass-spring-mass building design.

Code-driven noise requirements have placed a financial burden on multi-family projects.…

The CAV-AIR-ATOR™ is a full-wall drainage and ventilation mat for full brick or stone masonry walls. It prevents mortar from entering the cavity, clinging to wall ties, or blocking weep holes. The innovative design of the CAV-AIR-ATOR™ allows it to be extremely light…

CONCRETAL Sol-silicate mineral stains and finishes are intended for all concrete surfaces. They penetrate the concrete, forming chemical bonds within; the finish can never lose adhesion, blister, or peel. Coupling completely light-fast earthen mineral pigments with the natural …

Mineral-Art™ paints, stains and glazes are your assurance of rich, true mineral colors that will last for decades. Some Keim painted murals in Europe are even over 100 years old and retain their rich, vivid colors today!

And, with Mineral-Art™ products and services you have…

KEIM Sol--Silicate Pigmented Mineral Stains are available in three options:

• Concretal Stain for all concrete
  
• Restauro Stain for all natural stone
  
• Design Stain for any masonry surface, interior or exterior
  

Mineral…

ECB® Classic is a 40-mil (1 mm [1/16-in.]) thick, self-adhering, sheet-applied, elastomeric membrane designed for use under floor surfaces requiring protection from structural movement. 

ECB® may be installed over concrete or wood substrates and over…

Super SAM® 125 is a self-adhering, sound-deadening sheet membrane chemically formulated to reduce airborne and impact sound transmission when used under stone, ceramic and porcelain tile, wood, and other hard-surface flooring. Super SAM® 125 is composed of modified elastomers, sound-deadening…

SubSeal® is a ready-to-use, elastomeric waterproofing membrane that also functions as a sealant, standalone crack-suppressant, and moisture barrier for interior and exterior applications of hard-surface, resilient, and wood flooring. 

SubSeal® can be used at floor-to-wall,…

The Ultra Drain Mat system keeps moisture from entering the wall through…

FIRE-TESTED Rustproof ULTRA-LATH PLUS® Plastic Lath

Perfect for rustproofing stone veneer and stucco installations,
Ultra-Lath Plus® plastic lath is designed for continuous reinforcement in exterior three-coat stucco and stone veneer system applications, or…

Electric actuation
User-friendly and versatile,…

Ross XL-501 Post and Beam Anti-Ram Fence safeguards high-risk facilities with reliable perimeter protection against vehicle-borne attacks, offering crash-test-certified, truck-stopping strength for head-on impacts.

This proven barrier system provides maximum security for buildings,…

Ideal for parking deck structures, Radcon Formula #7 will seal existing and future cracks to prevent reinforcement corrosion.

Among its benefits, the product:
• is 100% trafficable;
• does not require protection or topping;
• ensures problems are easy to find,…

Fields of application include:
•…

CWS ADMIX is a crystalline admixture that is added to new concrete during batching to offer waterproofing and protection for the life of the structure.

CWS ADMIX forms crystals within the pores and capillaries in the concrete, effectively blocking the passage of water. It also seals cracks…

Trim-Tex Wall-mounted Deflection Bead is designed to prevent inside corner cracking when installed against a ceiling or concrete deck that may be subjected to up to 11-mm (7 /16-in.) movement. Made from rustproof, dent-resistant polyvinyl chloride (PVC) to reduce job-site and handling…

Deep rigid polyvinyl chloride (PVC) "V" is joined at the bottom with a flexible connection allowing a full 9.5 mm (3/8 in.) in controlled movement. Tear-off strips protect the center from mud, and act as guide for a taping knife. Ultraviolet (UV)-stabilized for interior or exterior applications. Requires proper backing on fire-rated walls.

When a project requires elevated levels of occupant comfort and distinguished aesthetics, the Solarban® brand of solar control low-emissivity (low-e) glasses by Vitro Architectural Glass (formerly PPG Glass) offers ways to help achieve the design objectives.

For half a…

Achieve a new measure of solar-control performance with award-winning Solarban® 90 glass by Vitro Architectural Glass (formerly PPG Glass). Recipient of an R&D 100 Award from R&D Magazine, Solarban 90 Glass is the first product to feature Vitro Glass’s proprietary…