TRUFAST Thermal-Grip products deliver efficient solutions for attaching continuous insulation and masonry veneer while supporting thermal and air-barrier performance.

The Thermal-Grip MVA Masonry Veneer Anchor secures brick or stone veneer through continuous insulation and sheathing to wood, steel, masonry, or concrete substrates. Its polycarbonate barrel minimizes thermal transfer by preventing steel-on-steel contact, while an integrated wedge seal helps protect blind penetrations in the water-resistive barrier. The system also transfers tension and compression loads back to the structure and is available with galvanized or stainless-steel wire ties.

The Thermal-Grip TubeSeal fastener mechanically attaches rigid foam or mineral wool insulation while helping seal fastener penetrations through the WRB or air barrier. Its UV-resistant polyurethane tube compresses between the substrate and insulation, creating a seal at the barrier surface. Preassembled HiLo screws support wood applications, while self-drilling screws simplify attachment to steel.

Thermal-Grip Insulation Pins feature a large 2.25-inch washer head and preassembled galvanized steel pins for fastening EPS, XPS, polyisocyanurate, or mineral wool. Concrete/CMU and steel-stud options are available in lengths from 1 to 6 inches. Used with the gas-actuated IP40D or IP50D pinner tool, the system provides rapid installation, a secure hold, and a clean, flush finish without screws or adhesives