All information listed in this section was submitted by the respective companies. Kenilworth Media Inc. and CSI cannot assume responsibility for errors of relevance, fact or omission.

DuPont™ ArmorWall™ System – A 5-in-1 exterior wall assembly

DuPont

06 16 13 Insulating Sheathing

The ArmorWall™ System enables multiple cladding attachment points virtually anywhere on the panel without requiring attachment back to the stud frame assembly or substrate. Attaching virtually any cladding type, including brick, rainscreen assemblies and even solar panels is no problem for ArmorWall™ thanks to its unique Magnesium Oxide (MgO) sheathing, providing exceptional strength and durability.

Key features and benefits:

  • Proven performance for 1- and 2-hour fire ratings and NFPA 285 compliance
  • Third-party verified performance featured in multiple ICC-ES Listings
  • Streamlines installation saving time, labor and material costs
  • Enables direct attachment of cladding support without fastening back to studs
  • Features a pre-applied air- and water-resistive barrier
  • Provides high R-value of 6.5 per inch
  • Patented Fusion Technology bonds the insulation to the MgO, preventing voids seen in products that glue or laminate materials together
  • Certified by GreenCircle and eligible for LEED credits
  • Enables compliance with ASHRAE 90.1 continuous insulation (CI) and thermal bridging energy code requirements



Contact Information

Phone: 989-259-2734


Related Articles

Structural Safety of Wood Decks and Deck Guards: Multi-family Balconies

Multi-family balconies are often framed with cantilevered wood, with a concrete covering and gypsum or vinyl ceiling. Structural drawings for a project typically contain a note describing the quality of lumber materials assumed and used by the structural engineer in the structural design process.

More than one way to skin a building

Prior to the mid-20th century, building walls relied on their thickness and density to resist water penetration. Moisture would mainly deflect from the wall face or be absorbed and later evaporate from the mass wall.

Timber towers: The future of tall wood design

Advocates for mass timber construction boast of faster construction times, lower labor costs, and environmental benefits. However, some building professionals are skeptical. The design firm Hickok Cole has designed Timber Towers, a conceptual 60-story mass timber skyscraper, to showcase what is possible with wood.

DCA3: Designing fire-rated I-joist assemblies

For years, Design for Code Acceptance #3 (DCA3) has been the go-to resource for anyone working with I-joist assemblies. I-joist (WIJ) assemblies were added to DCA3 in 2001 and were intended to promote the usage of engineered lumber by simplifying the associated design, specification, and permitting processes.

The new wood: Architectural ceiling and wall panels get a makeover

Wood's beauty has long been appreciated for both architectural ceiling and wall panel assemblies. Significant changes during the past decade have led to new fabrication techniques and products complementing traditional millwork.

Investigating Sheathing Durability: Infrared surveys in hot climates

The ability to detect trapped moisture within a wall system is useful in evaluating the condition of an exterior wall system, and critical for evaluating sheathing durability. Finding hidden water using non-destructive techniques such as infrared imaging can be useful if the techniques are used correctly.

Read the Latest Issue

September 2025 cover
September 2025
Flipbook
PDF